uta.edu参考文章(37)
N. Dechev, W.L. Cleghorn, J.K. Mills, Microassembly of 3D MEMS structures utilizing a MEMS microgripper with a robotic manipulator international conference on robotics and automation. ,vol. 3, pp. 3193- 3199 ,(2003) , 10.1109/ROBOT.2003.1242082
N. Koopman, S. Bobbio, S. Nangalia, J. Bousaba, B. Piekarski, Fluxless soldering in air and nitrogen electronic components and technology conference. pp. 595- 605 ,(1993) , 10.1109/ECTC.1993.346788
T. Nishikawa, M. Ijuin, R. Satoh, Y. Iwata, M. Tamura, M. Shirai, Fluxless soldering process technology electronic components and technology conference. pp. 286- 292 ,(1994) , 10.1109/ECTC.1994.367618
J.-S. Park, L.L. Chu, E. Siwapornsathain, A.D. Oliver, Y.B. Gianchandani, Long throw and rotary output electro-thermal actuators based on bent-beam suspensions international conference on micro electro mechanical systems. pp. 680- 685 ,(2000) , 10.1109/MEMSYS.2000.838600
M.J. Sinclair, A high force low area MEMS thermal actuator intersociety conference on thermal and thermomechanical phenomena in electronic systems. ,vol. 1, pp. 127- 132 ,(2000) , 10.1109/ITHERM.2000.866818
Kenneth Tsui, Aaron A Geisberger, Matt Ellis, George D Skidmore, Micromachined end-effector and techniques for directed MEMS assembly Journal of Micromechanics and Microengineering. ,vol. 14, pp. 542- 549 ,(2004) , 10.1088/0960-1317/14/4/015
H. Lorenz, M. Laudon, P. Renaud, Mechanical characterization of a new high-aspect-ratio near UV-photoresist Microelectronic Engineering. ,vol. 41, pp. 371- 374 ,(1998) , 10.1016/S0167-9317(98)00086-0
Dongwook Kim, Chin C. Lee, Fluxless flip–chip SnAu solder interconnect on thin Si wafers and Cu laminated polyimide films Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 416, pp. 74- 79 ,(2006) , 10.1016/J.MSEA.2005.09.084
Uthara Srinivasan, Michael A. Helmbrecht, Richard S. Muller, Roger T. Howe, MEMS: Some Self-Assembly Required Optics & Photonics News. ,vol. 13, pp. 20- 24 ,(2002) , 10.1364/OPN.13.11.000020
Thorbjoern Ebefors, Johan Ulfstedt-Mattsson, Edvard Kaelvesten, Goeran Stemme, 3D micromachined devices based on polyimide joint technology Device and process technologies for MEMS and microelectronics. Conference. ,vol. 3892, pp. 118- 132 ,(1999) , 10.1117/12.364509