Slow strain rate tensile and fatigue properties of Cr–Mo and carbon steels in a 115 MPa hydrogen gas atmosphere
作者： Hisao Matsunaga , Michio Yoshikawa , Ryota Kondo , Junichiro Yamabe , Saburo Matsuoka
DOI: 10.1016/J.IJHYDENE.2015.02.098
关键词:
摘要: … strength of the material, ie, the fatigue limit for stress ratio R of … the allowable stress and the fatigue limit obtained in the … in the current study, the fatigue limits seem to be equivalent …
elsevier.com
sci-hub.se 参考文章(10)
Arnaud Macadre, Maxim Artamonov, Saburo Matsuoka, Jader Furtado, Effects of hydrogen pressure and test frequency on fatigue crack growth properties of Ni–Cr–Mo steel candidate for a storage cylinder of a 70MPa hydrogen filling station Engineering Fracture Mechanics. ,vol. 78, pp. 3196- 3211 ,(2011) , 10.1016/J.ENGFRACMECH.2011.09.007
Yoru Wada, Effect of Cycle Frequency on Fatigue Crack Propagation Behavior for Steels in Hydrogen Storage Volume 6B: Materials and Fabrication. ,(2013) , 10.1115/PVP2013-97485
Junichiro Yamabe, Hisao Matsunaga, Yoshiyuki Furuya, Shigeru Hamada, Hisatake Itoga, Michio Yoshikawa, Etsuo Takeuchi, Saburo Matsuoka, Qualification of chromium–molybdenum steel based on the safety factor multiplier method in CHMC1-2014 International Journal of Hydrogen Energy. ,vol. 40, pp. 719- 728 ,(2015) , 10.1016/J.IJHYDENE.2014.10.114
Chris San Marchi, Brian P. Somerday, Kevin A. Nibur, Development of methods for evaluating hydrogen compatibility and suitability International Journal of Hydrogen Energy. ,vol. 39, pp. 20434- 20439 ,(2014) , 10.1016/J.IJHYDENE.2014.03.234
B.P. Somerday, P. Sofronis, K.A. Nibur, C. San Marchi, R. Kirchheim, Elucidating the variables affecting accelerated fatigue crack growth of steels in hydrogen gas with low oxygen concentrations Acta Materialia. ,vol. 61, pp. 6153- 6170 ,(2013) , 10.1016/J.ACTAMAT.2013.07.001
Kevin A. Nibur, Brian P. Somerday, Chris San Marchi, James W. Foulk, Mohsen Dadfarnia, Petros Sofronis, The Relationship Between Crack-Tip Strain and Subcritical Cracking Thresholds for Steels in High-Pressure Hydrogen Gas Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 44, pp. 248- 269 ,(2013) , 10.1007/S11661-012-1400-5
Taisuke MIYAMOTO, Takashi MATSUO, Nobuo KOBAYASHI, Yuki MUKAIE, Saburo MATSUOKA, Characteristics of Fatigue Life and Fatigue Crack Growth of SCM435 Steel in High-Pressure Hydrogen Gas Transactions of the Japan Society of Mechanical Engineers. A. ,vol. 78, pp. 531- 546 ,(2012) , 10.1299/KIKAIA.78.531
Hiroyuki TANAKA, Nobuhiro HOMMA, Saburo MATSUOKA, Yukitaka MURAKAMI, Effect of hydrogen and frequency on fatigue behavior of SCM435 steel for storage cylinder of hydrogen station Transactions of the Japan Society of Mechanical Engineers. A. ,vol. 73, pp. 1358- 1365 ,(2007) , 10.1299/KIKAIA.73.1358
Michio YOSHIKAWA, Takashi MATSUO, Noriko TSUTSUMI, Hisao MATSUNAGA, Saburo MATSUOKA, Effects of hydrogen gas pressure and test frequency on fatigue crack growth properties of low carbon steel in 0.1-90 MPa hydrogen gas Transactions of the JSME (in Japanese). ,vol. 80, ,(2014) , 10.1299/TRANSJSME.2014SMM0254
Yukitaka Murakami, Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions ,(2002)