Polypropylene-based composite resin composition
作者： Osamu Isogai , Koki Hirano , Toshifumi Shimazaki , Masaru Nakagawa
DOI:
关键词:
摘要: A polypropylene-based composite resin composition in which: (1) the complex viscosity .eta.* as measured at 190~C and an angular frequency (.omega.) of 0.1 rad/s is 2,000 Pa.cndot.s or higher; (2) storage moduli shear G'100, G'10, G'0.1, G'0.01 90~C frequencies 100, 10, 0.1, 0.01 respectively satisfy following relationships (I) (II); log(G'100)-log(G'10)>=0.6 log(G'0.1)-log(G'0.01)<=0.4 (II) (3) modulus G'0.0251 0.0251 60 Pa higher. Even when injection-molded a shortened molding cycle time, less apt to cause failures such short shot, burrs, surface adhesion failures, deformation, legginess.
lens.org 参考文章(17)
Tatsuya Housaki, Hideo Kusuyama, Sueto Miyazaki, Masaru Nakagawa, Akira Tanaka, Polypropylene block copolymer resin and compositions ,(1992)
Christian Maletzko, Klaus Hahn, Isidor de Grave, Uwe Keppeler, Expandable polyolefin particles ,(2002)
Yutaka Obata, Masaru Nakagawa, Yasuhisa Sugita, Hiroki Nakashima, Takashi Saeki, Kenichi Mitsuhashi, Propylene resin composition and process for producing the same ,(2000)
Austin John Frankle, Chester L Baker, Finely divided silica product and its method of preparation ,(1958)
Tomio Tatsumi, Yasuhiro Goto, Shuji Machida, Masaru Nakagawa, Propylene polymer composition, molded object, and polyolefin copolymer ,(2002)
Peggy S. Willett, Michael A. Johnson, Scott R. Meyer, Clayton A. George, Melt-flowable materials and method of sealing surfaces ,(1996)
Motoki Yamada, Yutaka Kobayashi, Masaru Nakagawa, Takashi Sumitimo, Masatoshi Toda, Polypropylene-based resins and polypropylene-based resin compositions ,(1997)
Hiroyuki Sugimoto, Yoshihiro Nakatsuji, Thermoplastic elastomer composition for powder molding, powder and molded article thereof ,(2000)
Masayuki C O Idemitsu Tsuruoka, Masaru C O Idemitsu P Nakagawa, Akira C O Idemitsu Petr Tanaka, Polyolefinic resin and a resin composition comprising said resin ,(1993)
Masaru Nakagawa, Kenji Tanaka, Tetsuya Nakamura, Yasuhisa Sugita, Propylene-ethylene block copolymer, resin composition, and blow-molded article ,(2000)