Twelve-phase open-winding SPMSM development for speed dependent reconfigurable traction drive
作者： T. Gerrits , J. L. Duarte , C. G. E. Wijnands , E. A. Lomonova , J. J. H. Paulides
DOI: 10.1109/EVER.2015.7112974
关键词:
摘要: Commercially available electrical machines are generally not optimized for a broad operating range, as required in e.g. vehicle traction applications. The mechanical angular velocity of the wheels propulsion is relatively low (around 1,000 rpm), while torque demand high 500 Nm). This combination requires an adequate solution mechanical, electromechanical or domain. No cheap, reliable, lightweight and efficient has been invented yet. paper presents operation method dynamic electric system using variable torque/speed characteristics. With this method, speed range machine can be extended. twelve-phase open-winding surface permanent magnet synchronous presented developed to verify different drive modes practice.
tue.nl参考文章(15)
Eckart Nipp, Permanent magnet motor drives with switched stator windings Institutionen för elkraftteknik. ,(1999)
T. Gerrits, C. G. E. Wijnands, J. L. Duarte, J. J. H. Paulides, Electrical gearbox equivalent by means of dynamic machine operation european conference on power electronics and applications. pp. 1- 10 ,(2011)
M. Ehsani, Yimin Gao, S. Gay, Characterization of electric motor drives for traction applications conference of the industrial electronics society. ,vol. 1, pp. 891- 896 ,(2003) , 10.1109/IECON.2003.1280101
Brigette Sneyers, Donald W. Novotny, Thomas A. Lipo, Field Weakening in Buried Permanent Magnet AC Motor Drives IEEE Transactions on Industry Applications. ,vol. IA-21, pp. 398- 407 ,(1985) , 10.1109/TIA.1985.349661
Y. Tang, J. J. H. Paulides, T. E. Motoasca, E. A. Lomonova, Flux-Switching Machine With DC Excitation IEEE Transactions on Magnetics. ,vol. 48, pp. 3583- 3586 ,(2012) , 10.1109/TMAG.2012.2199100
F. Caricchi, F. Crescimbini, F. Mezzetti, E. Santini, Multistage axial-flux PM machine for wheel direct drive IEEE Transactions on Industry Applications. ,vol. 32, pp. 882- 888 ,(1996) , 10.1109/28.511645
Thomas Gerrits, Cornelis G. E. Wijnands, Johannes J. H. Paulides, Jorge L. Duarte, Fault-Tolerant Operation of a Fully Electric Gearbox Equivalent IEEE Transactions on Industry Applications. ,vol. 48, pp. 1855- 1865 ,(2012) , 10.1109/TIA.2012.2222332
T.J. Woolmer, M.D. McCulloch, Analysis of the Yokeless And Segmented Armature Machine international electric machines and drives conference. ,vol. 1, pp. 704- 708 ,(2007) , 10.1109/IEMDC.2007.382753
P. A. Veenhuizen, S. Poncy, T.W.G.L. Klaassen, B. Bonsen, C. Changenet, P.H.W.M. Albers, Pushbelt CVT efficiency improvement potential of servo-electromechanical actuation and slip control s.n.. ,(2004)
C.-T. Pan, J.-H. Liaw, A robust field-weakening control strategy for surface-mounted permanent-magnet motor drives IEEE Transactions on Energy Conversion. ,vol. 20, pp. 701- 709 ,(2005) , 10.1109/TEC.2005.861039