The effect of reinforcement volume ratio on porosity and thermal conductivity in Al-Mgo composites

作者: Recep Calin , Muharrem Pul , Zühtü Onur Pehlivanli

DOI: 10.1590/S1516-14392012005000131

关键词:

摘要: In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) 5%, 10% 15% RVR produced by melt stirring. production composites, EN AW 1050A aluminum alloy was used as material MgO powders with particle size -105 µm material. For every specimen at 500 rev/min stirring speed, 750 °C liquid temperature 4 minutes time. Composite samples cooled under normal atmosphere. Then, microstructures determined evaluated using Scanning Electron Microscope (SEM) Energy Dispersive X-ray Spectroscopy (EDS) analysis. general, it observed that exhibited a homogeneous distribution. Furthermore, increase increased porosity. From images, Ansys model generated to determine effective conductivity. Effective decrease ratio.

参考文章(25)
J. S. Haggerty, A. Lightfoot, Opportunities for Enhancing the Thermal Conductivities of SiC and Si3N4 Ceramics Through Improved Processing Ceramic Engineering and Science Proceedings. pp. 475- 487 ,(2008) , 10.1002/9780470314715.CH52
A. Luo, Processing, microstructure, and mechanical behavior of cast magnesium metal matrix composites Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 26, pp. 2445- 2455 ,(1995) , 10.1007/BF02671259
B. C. Pai, Geetha Ramani, R. M. Pillai, K. G. Satyanarayana, Role of magnesium in cast aluminium alloy matrix composites Journal of Materials Science. ,vol. 30, pp. 1903- 1911 ,(1995) , 10.1007/BF00353012
You-Rong Liu, Jia-Jun Liu, Bao-Liang Zhu, Zhen-Bi Luo, He-Zhuo Miao, The computer simulation of the temperature distribution on the surface of ceramic cutting tools Wear. ,vol. 210, pp. 39- 44 ,(1997) , 10.1016/S0043-1648(97)00048-3
G. S. Hanumanth, G. A. Irons, Particle incorporation by melt stirring for the production of metal-matrix composites Journal of Materials Science. ,vol. 28, pp. 2459- 2465 ,(1993) , 10.1007/BF01151680
Koji Watari, Kiyoshi Hirao, Motohiro Toriyama, Kozo Ishizaki, Effect of Grain Size on the Thermal Conductivity of Si3N4 Journal of the American Ceramic Society. ,vol. 82, pp. 777- 779 ,(2004) , 10.1111/J.1151-2916.1999.TB01835.X
P.N Bindumadhavan, T.K Chia, M Chandrasekaran, Heng Keng Wah, Loh Nee Lam, O Prabhakar, Effect of particle-porosity clusters on tribological behavior of cast aluminum alloy A356-SiCp metal matrix composites Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 315, pp. 217- 226 ,(2001) , 10.1016/S0921-5093(00)01989-4
S. Naher, D. Brabazon, L. Looney, Development and assessment of a new quick quench stir caster design for the production of metal matrix composites Journal of Materials Processing Technology. ,vol. 166, pp. 430- 439 ,(2005) , 10.1016/J.JMATPROTEC.2004.09.043