Influence of Filler Particles on Deformation and Fracture Mechanism of Isotactic Polypropylene
作者： S.M. Zebarjad , M. Tahani , S.A. Sajjadi
DOI: 10.1016/J.JMATPROTEC.2004.04.187
关键词:
摘要: … particles on the deformation and fracture mechanism in PP/CaCO 3 composites. Several … in PP composite initiates from calcium carbonate particles, and deviates in different direction. …
um.ac.ir
elsevier.com
sci-hub.se 参考文章(23)
Béla Pukánszky, Erika Fekete, Adhesion and Surface Modification Advances in Polymer Science. ,vol. 139, pp. 109- 153 ,(1999) , 10.1007/3-540-69220-7_3
C. P. Buckley, C. B. Bucknall, Norman Gerard McCrum, Principles of polymer engineering ,(1988)
Béla Pukánszky, György Vörös, Stress distribution around inclusions, interaction, and mechanical properties of particulate‐filled composites Polymer Composites. ,vol. 17, pp. 384- 392 ,(1996) , 10.1002/PC.10625
J. Menczel, J. Varga, Influence of nucleating agents on crystallization of polypropylene Journal of Thermal Analysis and Calorimetry. ,vol. 28, pp. 161- 174 ,(1983) , 10.1007/BF02105288
José R Isasi, Leo Mandelkern, María J Galante, Rufina G Alamo, The degree of crystallinity of monoclinic isotactic poly(propylene) Journal of Polymer Science Part B. ,vol. 37, pp. 323- 334 ,(1999) , 10.1002/(SICI)1099-0488(19990215)37:4<323::AID-POLB6>3.0.CO;2-3
Z Bartczak, A.S Argon, R.E Cohen, M Weinberg, Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles Polymer. ,vol. 40, pp. 2347- 2365 ,(1999) , 10.1016/S0032-3861(98)00444-3
B. Pukánszky, M. Van Es, F. H. J. Maurer, G. Vörös, Micromechanical deformations in particulate filled thermoplastics: volume strain measurements Journal of Materials Science. ,vol. 29, pp. 2350- 2358 ,(1994) , 10.1007/BF00363426
R. J. Farris, The Influence of Vacuole Formation on the Response and Failure of Filled Elastomers Transactions of the Society of Rheology. ,vol. 12, pp. 315- 334 ,(1968) , 10.1122/1.549111
A. Khare, A. Mitra, S. Radhakrishnan, Effect of CaCO3 on the crystallization behaviour of polypropylene Journal of Materials Science. ,vol. 31, pp. 5691- 5695 ,(1996) , 10.1007/BF01160816
Mitsuyoshi Fujiyama, Tetsuo Wakino, Structures and properties of injection moldings of crystallization nucleator‐added polypropylenes. I. Structure–property relationships Journal of Applied Polymer Science. ,vol. 42, pp. 2739- 2747 ,(1991) , 10.1002/APP.1991.070421012