Wear performance investigation of PVD coated and uncoated carbide tools during high-speed machining of TiAl6V4 aerospace alloy
作者： M.S.I. Chowdhury , B. Bose , K. Yamamoto , L.S. Shuster , J. Paiva
DOI: 10.1016/J.WEAR.2019.203168
关键词:
摘要: Selection of hard PVD coatings for the machining of Ti6Al4V alloy should be based on the dominant tool wear mechanism and tribological phenomena occurring at the chip-tool-workpiece interface. The present work investigates the effect of AlTiN and CrN hard coatings on the wear performance of cemented carbide cutting tools during high-speed finish turning of Ti6Al4V. The wear characteristics of the tools were evaluated by SEM and 3D wear volume measurements. The in-situ tribological performance of the coatings was …
sci-hub.se 参考文章(31)
Rachid M'Saoubi, Dragos Axinte, Sein Leung Soo, Christoph Nobel, Helmi Attia, Gregor Kappmeyer, Serafettin Engin, Wei-Ming Sim, High performance cutting of advanced aerospace alloys and composite materials Cirp Annals-manufacturing Technology. ,vol. 64, pp. 557- 580 ,(2015) , 10.1016/J.CIRP.2015.05.002
K. Sato, N. Ichimiya, A. Kondo, Y. Tanaka, Microstructure and mechanical properties of cathodic arc ion-plated (Al, Ti)N coatings Surface & Coatings Technology. ,vol. 163, pp. 135- 143 ,(2003) , 10.1016/S0257-8972(02)00610-2
A. Kondo, T. Oogami, K. Sato, Y. Tanaka, Structure and properties of cathodic arc ion plated CrN coatings for copper machining cutting tools Surface and Coatings Technology. ,vol. 177-178, pp. 238- 244 ,(2004) , 10.1016/J.SURFCOAT.2003.09.039
B.D. Beake, G.S. Fox-Rabinovich, S.C. Veldhuis, S.R. Goodes, Coating optimisation for high speed machining with advanced nanomechanical test methods Surface & Coatings Technology. ,vol. 203, pp. 1919- 1925 ,(2009) , 10.1016/J.SURFCOAT.2009.01.025
P.A. Dearnley, A.N. Grearson, Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318 Materials Science and Technology. ,vol. 2, pp. 47- 58 ,(1986) , 10.1179/MST.1986.2.1.47
Da-Yung Wang, Jian-Hong Lin, Wei-Yu Ho, Study on chromium oxide synthesized by unbalanced magnetron sputtering Thin Solid Films. ,vol. 332, pp. 295- 299 ,(1998) , 10.1016/S0040-6090(98)01266-8
A. Biksa, K. Yamamoto, G. Dosbaeva, S.C. Veldhuis, G.S. Fox-Rabinovich, A. Elfizy, T. Wagg, L.S. Shuster, Wear behavior of adaptive nano-multilayered AlTiN/MexN PVD coatings during machining of aerospace alloys Tribology International. ,vol. 43, pp. 1491- 1499 ,(2010) , 10.1016/J.TRIBOINT.2010.02.008
A Leyland, A Matthews, On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour Wear. ,vol. 246, pp. 1- 11 ,(2000) , 10.1016/S0043-1648(00)00488-9
Norihiko Narutaki, Akio Murakoshi, Suguru Motonishi, Hidehiko Takeyama, Study on Machining of Titanium Alloys CIRP Annals. ,vol. 32, pp. 65- 69 ,(1983) , 10.1016/S0007-8506(07)63362-9
HS Qi, B Mills, None, Formation of a transfer layer at the tool-chip interface during machining Wear. ,vol. 245, pp. 136- 147 ,(2000) , 10.1016/S0043-1648(00)00474-9