The influences of aramid fibre and its compound with ceramic on shielding performance of stuffed layer
作者： Fa-wei Ke , Jie Huang , Xue-zhong Wen , Qiang Song , Qing Luo
DOI: 10.1016/J.ACTAASTRO.2018.08.025
关键词:
摘要: Abstract Four kinds of aramid fibre and three compound modes with ceramic were studied by hypervelocity impact tests respectively to probe the fabric layer higher performance in space debris shield configuration. The fibres include Aramid-II manufactured America, Aramid-II, Aramid-III PBO China. Based on above test results, was chosen basalt. hybrid weaving, affixing basalt layers glue, sewing them thread. configurations are impacted 5 mm-diameter Al projectile velocities 4.5 km/s 5.0 km/s. results show that containing has equivalent shielding fabric, they better than other two stuffed under areal density. is influenced adhesion degree fibre. all improve degree, however, over makes against dissipating kinetic energy cloud, which causes degrade.
harvard.edu
sci-hub.se 参考文章(13)
Frank Giovane, George Studor, Eric L. Christiansen, James Hyde, Dana Lear, Shannon Ryan, Thomas Prior, Martin Ratliff, Bob Corsaro, Alan Davis, Jim Arnold, Frankel Lyons, J.C. Liou, Handbook for Designing MMOD Protection ,(2009)
M.N. Smirnova, K.A. Kondrat'ev, Space debris fragments impact on multi-phase fluid filled containments Acta Astronautica. ,vol. 79, pp. 12- 19 ,(2012) , 10.1016/J.ACTAASTRO.2012.03.029
S. Ryan, T. Hedman, E.L. Christiansen, Honeycomb vs. foam: Evaluating potential upgrades to ISS module shielding Acta Astronautica. ,vol. 67, pp. 818- 825 ,(2010) , 10.1016/J.ACTAASTRO.2010.05.021
N.N. Smirnov, A.B. Kiselev, M.N. Smirnova, V.F. Nikitin, Space traffic hazards from orbital debris mitigation strategies Acta Astronautica. ,vol. 109, pp. 144- 152 ,(2015) , 10.1016/J.ACTAASTRO.2014.09.014
Xue-zhong Wen, Jie Huang, Fa-wei Ke, Zhao-xia Ma, Sen Liu, Debris dispersion effect in N-shape configuration☆ Acta Astronautica. ,vol. 104, pp. 173- 178 ,(2014) , 10.1016/J.ACTAASTRO.2014.06.037
HuLin Li, ZhongWei Yin, Dan Jiang, YaJun Huo, YuQing Cui, Tribological behavior of hybrid PTFE/Kevlar fabric composites with nano-Si3N4 and submicron size WS2 fillers Tribology International. ,vol. 80, pp. 172- 178 ,(2014) , 10.1016/J.TRIBOINT.2014.07.006
Ming Qiu, Yanwei Miao, Yingchun Li, Jianjun Lu, Film-forming mechanisms for self-lubricating radial spherical plain bearings with hybrid PTFE/aramid fabric liners modified by ultrasonic Tribology International. ,vol. 87, pp. 132- 138 ,(2015) , 10.1016/J.TRIBOINT.2015.02.025
S.A. Poniaev, S.V. Bobashev, B.G. Zhukov, R.O. Kurakin, A.I. Sedov, S.N. Izotov, S.L. Kulakov, M.N. Smirnova, Small-size railgun of mm-size solid bodies for hypervelocity material testing Acta Astronautica. ,vol. 109, pp. 162- 165 ,(2015) , 10.1016/J.ACTAASTRO.2014.11.012
N.N. Smirnov, K.A. Kondratyev, Evaluation of craters formation in hypervelocity impact of debris particles on solid structures Acta Astronautica. ,vol. 65, pp. 1796- 1803 ,(2009) , 10.1016/J.ACTAASTRO.2009.04.003
Lin Liu, Guang Li, The Influence of Milling Parameters on the Fibrillation of PBO Fiber Advanced Materials Research. ,vol. 482-484, pp. 1894- 1897 ,(2012) , 10.4028/WWW.SCIENTIFIC.NET/AMR.482-484.1894