Comparison of damaging behavior of oxide scales grown on austenitic stainless steels using tensile test and cyclic thermogravimetry
作者： E. Fedorova , M. Braccini , V. Parry , C. Pascal , M. Mantel
DOI: 10.1016/J.CORSCI.2015.11.012
关键词:
摘要: Two austenitic stainless steels, AISI 304L and 303, were submitted to cyclic oxidation static mechanical loading after isothermal at 1000 degrees C. Alloy 303 contains ten times more S than some Mn addition. During the steel process, it formed manganese sulfides that lead formation of a less resistant oxide scale. Both alloys showed similar behavior during thermal cycling but breakaway intensive spallation occurred much sooner for alloy 304L. A correlation could be drawn between tensile test on preoxidized samples, oxidation. (C) 2015 Elsevier Ltd. All rights reserved.
archives-ouvertes.fr
sci-hub.se 参考文章(30)
Ines Hofinger, Matthias Oechsner, Hans-Achim Bahr, Michael V. Swain, Modified four-point bending specimen for determining the interface fracture energy for thin, brittle layers International Journal of Fracture. ,vol. 92, pp. 213- 220 ,(1998) , 10.1023/A:1007530932726
S. R. J. Saunders, M. M. Nagl, D. J. Hall, W. T. Evans, An in situ investigation of the tensile failure of oxide scales. Oxidation of Metals. ,vol. 42, pp. 431- 449 ,(1994) , 10.1007/BF01046759
Daniel Monceau, Bernard Pieraggi, Determination of Parabolic Rate Constants from a Local Analysis of Mass-Gain Curves Oxidation of Metals. ,vol. 50, pp. 477- 493 ,(1998) , 10.1023/A:1018860909826
D. G. Lees, On the reasons for the effects of dispersions of stable oxides and additions of reactive elements on the adhesion and growth-mechanisms of chromia and alumina scales-the “sulfur effect” Oxidation of Metals. ,vol. 27, pp. 75- 81 ,(1987) , 10.1007/BF00656731
Alexandre La Fontaine, Hung-Wei Yen, Patrick Trimby, Steven Moody, Sarah Miller, Martin Chensee, Simon Ringer, Julie Cairney, Martensitic transformation in an intergranular corrosion area of austenitic stainless steel during thermal cycling Corrosion Science. ,vol. 85, pp. 1- 6 ,(2014) , 10.1016/J.CORSCI.2014.04.048
Peggy Y. Hou, John Stringer, Oxide scale adhesion and impurity segregation at the scale/metal interface Oxidation of Metals. ,vol. 38, pp. 323- 345 ,(1992) , 10.1007/BF00665658
G. J. Yurek, D. Eisen, A. Garratt-Reed, Oxidation behavior of a fine-grained rapidly solidified 18-8 stainless steel Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 13, pp. 473- 485 ,(1982) , 10.1007/BF02643355
C. Pascal, V. Parry, E. Fedorova, M. Braccini, P. Chemelle, N. Meyer, D. Oquab, D. Monceau, Y. Wouters, M. Mantel, Breakaway oxidation of austenitic stainless steels induced by alloyed sulphur Corrosion Science. ,vol. 93, pp. 100- 108 ,(2015) , 10.1016/J.CORSCI.2015.01.007
M.S. Hu, A.G. Evans, The cracking and decohesion of thin films on ductile substrates Acta Metallurgica. ,vol. 37, pp. 917- 925 ,(1989) , 10.1016/0001-6160(89)90018-7
D. Monceau, D. Poquillon, Continuous Thermogravimetry Under Cyclic Conditions Oxidation of Metals. ,vol. 61, pp. 143- 163 ,(2004) , 10.1023/B:OXID.0000016281.25965.93