Reactive compatibilization of an immiscible polyester/polyolefin blend with PP‐g‐MAH and PMPI dual compatibilizers
作者： Ji Hee Shin , Hyun Kyu Lee , Kyung Moon Kim , Kwang Hee Lee
DOI: 10.1002/APP.40232
关键词:
摘要: Blends of a polyester hot melt resin and poly-α-olefin were modified using the reactive compounding technique. The effects compatibilizers evaluated by studying mechanical properties, morphology, thermal properties blends. A pronounced compatibilizing effect was obtained with dual composed maleated polypropylene poly[methylene (phenylene isocyanate)] (PMPI). addition 1 phr PMPI sufficient to improve elongation tensile strength. From results, it is anticipated that can be used as an efficient coupler enhance compatibility immiscible polyester/polyolefin © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40232.
sci-hub.se 参考文章(27)
C.P. Papadopoulou, N.K. Kalfoglou, Comparison of compatibilizer effectiveness for PET/PP blends: their mechanical, thermal and morphology characterization Polymer. ,vol. 41, pp. 2543- 2555 ,(2000) , 10.1016/S0032-3861(99)00442-5
S. Paul, D. D. Kale, Blends of acrylonitrile–butadiene–styrene/waste poly(ethylene terephthalate) compatibilized by styrene maleic anhydride Journal of Applied Polymer Science. ,vol. 80, pp. 2593- 2599 ,(2001) , 10.1002/APP.1370
M.-Y. Ju, F.-C. Chang, Compatibilization of PET/PS blends through SMA and PMPI dual compatibilizers Polymer. ,vol. 41, pp. 1719- 1730 ,(2000) , 10.1016/S0032-3861(99)00355-9
Mixing and compounding of polymers : theory and practice Hanser Publishers , Distributed in the USA and Canada by Hanser/Gardner Publications. ,(2009) , 10.3139/9783446433717
Dhawal P. Dharaiya, Sadhan C. Jana, Nanoclay-induced morphology development in chaotic mixing of immiscible polymers Journal of Polymer Science Part B. ,vol. 43, pp. 3638- 3651 ,(2005) , 10.1002/POLB.20657
Wayne D. Cook, Graeme Moad, Bronwyn Fox, Gary Van Deipen, Tie Zhang, Ferenc Cser, Lawry McCarthy, Morphology–property relationships in ABS/PET blends. II. Influence of processing conditions on structure and properties Journal of Applied Polymer Science. ,vol. 62, pp. 1709- 1714 ,(1996) , 10.1002/(SICI)1097-4628(19961205)62:10<1709::AID-APP22>3.0.CO;2-V
S. H. Jafari, A. K. Gupta, S. K. Rana, Effect of nylon 6 inclusions on the crystalline morphology of polypropylene–nylon 6 blends Journal of Applied Polymer Science. ,vol. 75, pp. 1769- 1775 ,(2000) , 10.1002/(SICI)1097-4628(20000401)75:14<1769::AID-APP11>3.0.CO;2-J
Xuejing Zheng, Jun Zhang, Jiasong He, Compatibilization of nylon 6/liquid crystalline polymer blends with three types of compatibilizers Journal of Applied Polymer Science. ,vol. 87, pp. 1452- 1461 ,(2003) , 10.1002/APP.11581
W. Hale, H. Keskkula, D.R. Paul, Compatibilization of PBT/ABS blends by methyl methacrylate-glycidyl methacrylate-ethyl acrylate terpolymers Polymer. ,vol. 40, pp. 365- 377 ,(1999) , 10.1016/S0032-3861(98)00189-X
Li-Tang Yan, Jing Sheng, Analysis of phase morphology and dynamics of immiscible PP/PA1010 blends and its partial-miscible blends during melt mixing from SEM patterns Polymer. ,vol. 47, pp. 2894- 2903 ,(2006) , 10.1016/J.POLYMER.2006.02.048