Stresses and failure in the diametral compression test

作者: M. K. Fahad

DOI: 10.1007/BF00352786

关键词:

摘要: The validity of the diametral disc test with a small flat ground has been established. stress distribution was determined by finite element method for range loading conditions. results show that case point load, failure is due to shear and compressive stresses at point. Application proposed tested. width flattened area must be less than 0.2 times diameter obtain accurate tensile strength.

参考文章(9)
J. Takagi, M.C. Shaw, Evaluation of Fracture Strength of Brittle Tools CIRP Annals. ,vol. 30, pp. 53- 57 ,(1981) , 10.1016/S0007-8506(07)60894-4
J.E.O. Ovri, T.J. Davies, Diametral compression of silicon nitride Materials Science and Engineering. ,vol. 96, pp. 109- 116 ,(1987) , 10.1016/0025-5416(87)90545-3
R Berenbaum, I Brodie, Measurement of the tensile strength of brittle materials British Journal of Applied Physics. ,vol. 10, pp. 281- 287 ,(1959) , 10.1088/0508-3443/10/6/307
J.A. Hudson, E.T. Brown, F. Rummel, The controlled failure of rock discs and rings loaded in diametral compression International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts. ,vol. 9, pp. 241- 248 ,(1972) , 10.1016/0148-9062(72)90025-3
M. C. Shaw, P. M. Braiden, G. J. DeSalvo, The Disk Test for Brittle Materials Journal of Engineering for Industry. ,vol. 97, pp. 77- 87 ,(1975) , 10.1115/1.3438594
J.A. Hooper, The failure of glass cylinders in diametral compression Journal of the Mechanics and Physics of Solids. ,vol. 19, pp. 179- 188 ,(1971) , 10.1016/0022-5096(71)90027-5
J. C. Jaeger, E. R. Hoskins, Rock failure under the confined Brazilian test Journal of Geophysical Research. ,vol. 71, pp. 2651- 2659 ,(1966) , 10.1029/JZ071I010P02651
Stephen P Timoshenko, James Norman Goodier, Theory of elasticity ,(1934)