Estimation of material and interfacial/interphase properties in clay/polymer nanocomposites by yield strength data
作者： Yasser Zare
DOI: 10.1016/J.CLAY.2015.07.021
关键词:
摘要: Abstract In this article, a new and simple approach is presented for calculation of material interfacial/interphase properties in clay/polymer nanocomposites (CPN) by the experimental results yield strength. The “B” interaction parameter from Pukanszky model correlated with several characteristics such as strength polymer matrix (σ m ), aspect ratio clay (α), stress transfer (s), thickness (t i ) interphase. suggested equations are applied to calculate examine samples CPN. Also, effects all parameters on “σ ” “t determined predict relations between properties. According equations, low high produced insignificant Furthermore, thick interphase caused large at region.
sci-hub.se 参考文章(38)
Mohsen Hajibeygi, Meisam Shabanian, Hossein Ali Khonakdar, Zn–AL LDH reinforced nanocomposites based on new polyamide containing imide group: From synthesis to properties Applied Clay Science. ,vol. 114, pp. 256- 264 ,(2015) , 10.1016/J.CLAY.2015.06.008
Yasser Zare, A simple technique for determination of interphase properties in polymer nanocomposites reinforced with spherical nanoparticles Polymer. ,vol. 72, pp. 93- 97 ,(2015) , 10.1016/J.POLYMER.2015.06.060
Mohammad Norouzi, Yasser Zare, Parvin Kiany, Nanoparticles as Effective Flame Retardants for Natural and Synthetic Textile Polymers: Application, Mechanism, and Optimization Polymer Reviews. ,vol. 55, pp. 531- 560 ,(2015) , 10.1080/15583724.2014.980427
William D. Callister, Materials Science and Engineering: An Introduction ,(1985)
S SU, Polybutadiene-modified clay and its nanocomposites Polymer Degradation and Stability. ,vol. 84, pp. 279- 288 ,(2004) , 10.1016/J.POLYMDEGRADSTAB.2003.09.023
Yasser Zare, Ali Daraei, Mostafa Vatani, Parya Aghasafari, An analysis of interfacial adhesion in nanocomposites from recycled polymers Computational Materials Science. ,vol. 81, pp. 612- 616 ,(2014) , 10.1016/J.COMMATSCI.2013.08.041
Miroslav Huskić, Majda Žigon, Marica Ivanković, Comparison of the properties of clay polymer nanocomposites prepared by montmorillonite modified by silane and by quaternary ammonium salts Applied Clay Science. ,vol. 85, pp. 109- 115 ,(2013) , 10.1016/J.CLAY.2013.09.004
M. Kato, H. Okamoto, N. Hasegawa, A. Tsukigase, A. Usuki, Preparation and properties of polyethylene‐clay hybrids Polymer Engineering and Science. ,vol. 43, pp. 1312- 1316 ,(2003) , 10.1002/PEN.10111
Andrea Lazzeri, Vu Thanh Phuong, Dependence of the Pukánszky's interaction parameter B on the interface shear strength (IFSS) of nanofiller- and short fiber-reinforced polymer composites Composites Science and Technology. ,vol. 93, pp. 106- 113 ,(2014) , 10.1016/J.COMPSCITECH.2014.01.002
H Daniel Wagner, Nanotube-polymer adhesion: a mechanics approach Chemical Physics Letters. ,vol. 361, pp. 57- 61 ,(2002) , 10.1016/S0009-2614(02)00948-X