Material removal rate for nanocomposite ceramics in ultrasound-aided electrolytic in process dressing:
作者： Fan Chen , Bo Zhao , Xiaofeng Jia , Xiaobo Wang
关键词:
摘要: Nanocomposite ceramics possess beneficial mechanical and physical characteristics over traditional engineering ceramics; however, there is currently no effective method of machining nanocomposites ceramics. This paper proposes a new ultrasound-aided electrolytic in-process dressing method. There are many factors influencing the material removal rate in grinding. In order to optimize processing parameters guide practice, models developed simulate process based on ductile failure brittle rupture models, influence grinding rates obtained. With model, analyzed by MATLAB. The analysis results verified test: increases with increase parameters; depth cut signif...
sagepub.com
sci-hub.se 参考文章(21)
Sanjay Agarwal, On the mechanism and mechanics of material removal in ultrasonic machining International Journal of Machine Tools & Manufacture. ,vol. 96, pp. 1- 14 ,(2015) , 10.1016/J.IJMACHTOOLS.2015.05.006
Jacob Verkerk, Final Report Concerning CIRP Cooperative Work on the Characterization of Grinding Wheel Topography Annals of the CIRP. ,vol. 26, pp. 385- 395 ,(1977)
Debin Wang, Takeo Shinmura, Hitomi Yamaguchi, Study of magnetic field assisted mechanochemical polishing process for inner surface of Si3N4 ceramic components: Finishing characteristics under wet finishing using distilled water International Journal of Machine Tools & Manufacture. ,vol. 44, pp. 1547- 1553 ,(2004) , 10.1016/J.IJMACHTOOLS.2004.04.024
Martin G. Schinker, Subsurface damage mechanisms at high-speed ductile machining of optical glasses Precision Engineering. ,vol. 13, pp. 208- 218 ,(1991) , 10.1016/0141-6359(91)90100-W
A. Mohammadi, A.F. Tehrani, A. Abdullah, Introducing a New Technique in Wire Electrical Discharge Turning and Evaluating Ultrasonic Vibration on Material Removal Rate Procedia CIRP. ,vol. 6, pp. 583- 588 ,(2013) , 10.1016/J.PROCIR.2013.03.005
Shaohui Yin, Hitoshi Ohmori, Yutang Dai, Yoshihiro Uehara, Fengjun Chen, Hengning Tang, ELID grinding characteristics of glass-ceramic materials International Journal of Machine Tools & Manufacture. ,vol. 49, pp. 333- 338 ,(2009) , 10.1016/J.IJMACHTOOLS.2008.10.013
Ma Chunxiang, Wang Yan, E Shamoto, INFLUENCE OF ULTRASONIC VIBRATED DIAMOND TOOL ON THE CRITICAL DEPTH OF CUT OF BRITTLE MATERIALS Chinese Journal of Mechanical Engineering. ,vol. 41, pp. 198- 202 ,(2005) , 10.3901/JME.2005.06.198
T.R. Wilshaw, C.A. Rau, A.S. Tetelman, A general model to predict the elastic-plastic stress distribution and fracture strength of notched bars in plane strain bending Engineering Fracture Mechanics. ,vol. 1, pp. 191- 211 ,(1968) , 10.1016/0013-7944(68)90025-8
E. Uhlmann, G. Spur, Surface Formation in Creep Feed Grinding of Advanced Ceramics with and without Ultrasonic Assistance CIRP Annals. ,vol. 47, pp. 249- 252 ,(1998) , 10.1016/S0007-8506(07)62828-5
Brian Derby, None, Ceramic nanocomposites: mechanical properties Current Opinion in Solid State & Materials Science. ,vol. 3, pp. 490- 495 ,(1998) , 10.1016/S1359-0286(98)80013-2