Recovery of copper, tin and lead from the spent nitric etching solutions of printed circuit board and regeneration of the etching solution

作者: Man-Seung Lee , Jong-Gwan Ahn , Jae-Woo Ahn

DOI: 10.1016/S0304-386X(03)00045-8

关键词:

摘要: Abstract In order to recover valuable metals and regenerate the etching solution from spent nitric solutions of printed circuit board (PCB), solvent extraction, stripping, electrowinning, precipitation cementation experiments have been performed. Nitric acid was selectively extracted by TBP pure stripped distilled water. After extracting acid, copper metal obtained electrowinning tin ions were precipitated adjusting pH with Pb(OH)2. Lead purity 99% iron powder.

参考文章(11)
Martin A. Hobin, Isadore Mockrin, Recovery of copper from waste nitrate liquors by electrolysis ,(1976)
Lorne D. Schwartz, Thomas H. Etsell, The cementation of lead from ammoniacal ammonium sulphate solution Hydrometallurgy. ,vol. 47, pp. 273- 279 ,(1998) , 10.1016/S0304-386X(97)00052-2
Oluf Bøckman, Terje Østvold, Products formed during cobalt cementation on zinc in zinc sulfate electrolytes Hydrometallurgy. ,vol. 54, pp. 65- 78 ,(2000) , 10.1016/S0304-386X(99)00059-6
S.A. Nosier, S.A Sallam, Removal of lead ions from wastewater by cementation on a gas-sparged zinc cylinder Separation and Purification Technology. ,vol. 18, pp. 93- 101 ,(2000) , 10.1016/S1383-5866(99)00052-0
M.A. Barakat, Recovery of lead, tin and indium from alloy wire scrap Hydrometallurgy. ,vol. 49, pp. 63- 73 ,(1998) , 10.1016/S0304-386X(98)00003-6
M. Černá, V. Bízek, J. Št'astová, V. Rod, Extraction of nitric acid with quaternary ammonium bases Chemical Engineering Science. ,vol. 48, pp. 99- 103 ,(1993) , 10.1016/0009-2509(93)80286-Y
Li Zongcheng, Bao Tiezhu, Shang Yuxing, Li Yigui, Determination of the thermodynamic equilibrium constant of the extraction system HNO3-tributylphosphate (TBP)-n-C7H16 Fluid Phase Equilibria. ,vol. 46, pp. 281- 293 ,(1989) , 10.1016/0378-3812(89)80041-X