Influence of zirconia surface treatments on resin cement bonding and phase transformation
作者： João Luiz Pozzobon , Vinicius Felipe Wandscher , Marilia Pivetta Rippe , Luiz Felipe Valandro
DOI: 10.1080/01694243.2016.1268413
关键词:
摘要: AbstractIt evaluated the effects of different zirconia surface treatments on bond strength a resin cement to Y-TZP (yttria-stabilized tetragonal zirconia) ceramics, as well their phase-transformations. 75 blocks (5 mm × 5 mm × 4 mm) were assigned into five groups (n = 15): (tribochemical silica coating - TBS) was abraded by coated alumina particles followed silanization; (GLZ1) received application thin layer low-fusing porcelain glaze, hydrofluoric acid (HF) etching for 1 min; (GLZ5) glaze + HF 5 min; (GLZ10) application + HF 10 min; (GLZ15) + HF 15 min. After etching, all specimens washed, dried and silanized. Cylinders composites (diameter: 3.25 mm; height: 3 mm) cemented using cement. All subjected aging (10,000 thermal cycles 90 days storage), tested under shear conditions, and...
cheric.org参考文章(45)
Cenk Cura, Mutlu Özcan, Ahmet Saracoglu, Gül Isik, Comparison of Alternative Adhesive Cementation Concepts for Zirconia Ceramic: Glaze Layer vs Zirconia Primer Journal of Adhesive Dentistry. ,vol. 14, pp. 75- 82 ,(2012) , 10.3290/J.JAD.A21493
LC Anami, JMC Lima, LF Valandro, CJ Kleverlaan, AJ Feilzer, MA Bottino, None, Fatigue Resistance of Y-TZP/Porcelain Crowns is Not Influenced by the Conditioning of the Intaglio Surface Operative Dentistry. ,vol. 41, ,(2016) , 10.2341/14-166-L
Carolina Ceolin Druck, João Luiz Pozzobon, Gustavo Luiz Callegari, Lucio Strazzabosco Dorneles, Luiz Felipe Valandro, Adhesion to Y-TZP ceramic: study of silica nanofilm coating on the surface of Y-TZP. Journal of Biomedical Materials Research Part B. ,vol. 103, pp. 143- 150 ,(2015) , 10.1002/JBM.B.33184
Luiz Felipe Valandro, Alvaro Della Bona, Marco Cicero Bottino, Marco Antonio Bottino, Roberto Scotti, Mutlu Ozcan, Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: The effect of surface conditioning Journal of Adhesive Dentistry. ,vol. 8, pp. 175- 181 ,(2006) , 10.3290/J.JAD.A11226
Brian R Lawn, P Van Thompson, Yu Zhang, E Dianne Rekow, Kenneth A Malament, Damage accumulation and fatigue life of particle-abraded ceramics. International Journal of Prosthodontics. ,vol. 19, pp. 442- 448 ,(2006)
Daphne Camara Barcellos, Clovis Pagani, Mayra Cardoso, Ivan Balducci, Microtensile test in dental research. Controversial aspects in statistical analysis (experimental unit and premature failures) Brazilian dental science. ,vol. 16, pp. 07- 17 ,(2013) , 10.14295/BDS.2013.V16I3.869
Liliana Gressler May, Sheila Pestana Passos, Diana Barca Capelli, Mutlu Özcan, Marco Antonio Bottino, Luiz Felipe Valandro, Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic. Journal of Biomedical Materials Research Part B. ,vol. 95, pp. 69- 74 ,(2010) , 10.1002/JBM.B.31684
A Vanderlei, MA Bottino, LF Valandro, Evaluation of resin bond strength to yttria-stabilized tetragonal zirconia and framework marginal fit: comparison of different surface conditionings. Operative Dentistry. ,vol. 39, pp. 50- 63 ,(2014) , 10.2341/12-269-L
Vanni Lughi, Valter Sergo, Low temperature degradation -aging- of zirconia: A critical review of the relevant aspects in dentistry. Dental Materials. ,vol. 26, pp. 807- 820 ,(2010) , 10.1016/J.DENTAL.2010.04.006
Owen Addison, Peter M. Marquis, Garry J.P. Fleming, The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material. Dental Materials. ,vol. 23, pp. 461- 468 ,(2007) , 10.1016/J.DENTAL.2006.03.002