Fabricación de sockets de prótesis por mecanizado CNC

A. Jimeno, J.L. Sánchez, H. Mora, J. Mora, J.M. García-Chamizo, FPGA-based tool path computation: an application for shoe last machining on CNC lathes Computers in Industry. ,vol. 57, pp. 103- 111 ,(2006) , 10.1016/J.COMPIND.2005.05.004

Alan C. Lin, Hai-Terng Liu, Automatic generation of NC cutter path from massive data points Computer-aided Design. ,vol. 30, pp. 77- 90 ,(1998) , 10.1016/S0010-4485(97)00066-3

K L Chui, K M Yu, T C Lee, Direct tool-path generation from massive point input Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 216, pp. 199- 206 ,(2002) , 10.1243/0954405021519843

Young-Keun Choi, A. Banerjee, Jae-Woo Lee, Tool path generation for free form surfaces using Bézier curves/surfaces Computers & Industrial Engineering. ,vol. 52, pp. 486- 501 ,(2007) , 10.1016/J.CIE.2007.02.004

J. Steen Jensen, P. A. Poetsma, N. H. Thanh, Sand-casting technique for trans-tibial prostheses. Prosthetics and Orthotics International. ,vol. 29, pp. 165- 175 ,(2005) , 10.1080/03093640500224428

Chen Wenliang, Zeng Jianjiang, Li Lei, Ding Qiulin, An approach to gouging avoidance for sculptured surface machining Journal of Materials Processing Technology. ,vol. 138, pp. 458- 460 ,(2003) , 10.1016/S0924-0136(03)00117-1

Bill Rogers, Sean Stephens, Andrew Gitter, Gordon Bosker, Richard Crawford, Double-wall, Transtibial Prosthetic Socket Fabricated Using Selective Laser Sintering: A Case Study Jpo Journal of Prosthetics and Orthotics. ,vol. 12, pp. 97- 103 ,(2000) , 10.1097/00008526-200012030-00007

Sang C. Park, Yun C. Chung, Tool-path generation from measured data Computer-aided Design. ,vol. 35, pp. 467- 475 ,(2003) , 10.1016/S0010-4485(02)00070-2

Virgil W. Faulkner, Nicolas E. Walsh, Computer Designed Prosthetic Socket from Analysis of Computed Tomography Data Jpo Journal of Prosthetics and Orthotics. ,vol. 1, pp. 154- 164 ,(1989) , 10.1097/00008526-198904000-00010

Susan X. Li, Robert B. Jerard, 5-axis machining of sculptured surfaces with a flat-end cutter Computer-aided Design. ,vol. 26, pp. 165- 178 ,(1994) , 10.1016/0010-4485(94)90040-X