Morphological optimization of electrospun polyacrylamide/MWCNTs nanocomposite nanofibers using Taguchi’s experimental design
作者： Navid Amini , Mohammadreza Kalaee , Saeedeh Mazinani , Soheil Pilevar , Seyed-Omid Ranaei-Siadat
DOI: 10.1007/S00170-013-5006-X
关键词:
摘要: The morphological characteristic of electrospun polyacrylamide/multi-walled carbon nanotube (PAAm/MWCNTs) nanocomposite nanofibers is optimized in this work using Taguchi’s experimental design. optimization performed considering the effect PAAm concentration, MWCNTs content, flow rate, and applied voltage on average diameter. reasonable dispersion solution first ascertained via optical microscopy method. data required for process are then provided by statistical calculations field-emission scanning electron images samples formulated based a designed L 9 orthogonal array. concentration found to have most contribution final fibers morphology according results obtained from simultaneous implementation analysis variance mean assessment. Therefore, which consistence with viscosity surface tension parameter, forming including finest fiber On contrary, rate among selected parameters shows least nanofiber
springer.com
unirioja.es
sci-hub.se 参考文章(34)
Seeram Ramakrishna, Kazutoshi Fujihara, Wee-Eong Teo, Teik-Cheng Lim, Zuwei Ma, An introduction to electrospinning and nanofibers An Introduction to Electrospinning and Nanofibers. pp. 1- 382 ,(2005) , 10.1142/5894
S. N. Patra, R. J. T. Lin, D. Bhattacharyya, Regression analysis of manufacturing electrospun nonwoven nanotextiles Journal of Materials Science. ,vol. 45, pp. 3938- 3946 ,(2010) , 10.1007/S10853-010-4459-7
Xiaohua Liu, Youngjun Won, Peter X. Ma, Porogen-induced surface modification of nano-fibrous poly(l-lactic acid) scaffolds for tissue engineering Biomaterials. ,vol. 27, pp. 3980- 3987 ,(2006) , 10.1016/J.BIOMATERIALS.2006.03.008
Saeedeh Mazinani, Abdellah Ajji, Charles Dubois, Fundamental study of crystallization, orientation, and electrical conductivity of electrospun PET/carbon nanotube nanofibers Journal of Polymer Science Part B. ,vol. 48, pp. 2052- 2064 ,(2010) , 10.1002/POLB.22085
S.Y. Gu, J. Ren, G.J. Vancso, Process optimization and empirical modeling for electrospun polyacrylonitrile (PAN) nanofiber precursor of carbon nanofibers European Polymer Journal. ,vol. 41, pp. 2559- 2568 ,(2005) , 10.1016/J.EURPOLYMJ.2005.05.008
Zhenyu Li, Hongnan Zhang, Wei Zheng, Wei Wang, Huimin Huang, Ce Wang, Alan G. MacDiarmid, Yen Wei, Highly sensitive and stable humidity nanosensors based on LiCl doped TiO2 electrospun nanofibers. Journal of the American Chemical Society. ,vol. 130, pp. 5036- 5037 ,(2008) , 10.1021/JA800176S
O.S. Yördem, M. Papila, Y.Z. Menceloğlu, Effects of electrospinning parameters on polyacrylonitrile nanofiber diameter: An investigation by response surface methodology Materials & Design. ,vol. 29, pp. 34- 44 ,(2008) , 10.1016/J.MATDES.2006.12.013
Pirjo Heikkilä, Ali Harlin, Parameter study of electrospinning of polyamide-6 European Polymer Journal. ,vol. 44, pp. 3067- 3079 ,(2008) , 10.1016/J.EURPOLYMJ.2008.06.032
Edwin J.P. Jansen, Raymond E.J. Sladek, Hila Bahar, Avinoam Yaffe, Marion J. Gijbels, Roel Kuijer, Sjoerd K. Bulstra, Nick A. Guldemond, Itzhak Binderman, Leo H. Koole, Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering. Biomaterials. ,vol. 26, pp. 4423- 4431 ,(2005) , 10.1016/J.BIOMATERIALS.2004.11.011
Kevin S. Jack, Shiny Velayudhan, Paul Luckman, Matt Trau, Lisbeth Grøndahl, Justin Cooper-White, The fabrication and characterization of biodegradable HA/PHBV nanoparticle–polymer composite scaffolds Acta Biomaterialia. ,vol. 5, pp. 2657- 2667 ,(2009) , 10.1016/J.ACTBIO.2009.03.017