Studying the effects of cutting parameters on burr formation and deformation of hierarchical micro-structures in ultra-precision raster milling
作者： Wei Zhao , Haitao Wang , Wei Chen
DOI: 10.1007/S00170-018-3003-9
关键词:
摘要: … In this paper, three main machining parameters for ultra-precision raster milling are discussed, which are cutting depth (d: μm), feed rate (f: mm/ min), and spindle speed (ω: rpm). …
springer.com
sci-hub.se 参考文章(15)
Carmita Camposeco-Negrete, Juan de Dios Calderón Nájera, José Carlos Miranda-Valenzuela, Optimization of cutting parameters to minimize energy consumption during turning of AISI 1018 steel at constant material removal rate using robust design The International Journal of Advanced Manufacturing Technology. ,vol. 83, pp. 1341- 1347 ,(2016) , 10.1007/S00170-015-7679-9
Gwo-Lianq Chern, Experimental observation and analysis of burr formation mechanisms in face milling of aluminum alloys International Journal of Machine Tools & Manufacture. ,vol. 46, pp. 1517- 1525 ,(2006) , 10.1016/J.IJMACHTOOLS.2005.09.006
George Mathai, Shreyes Melkote, Effect of process parameters on the rate of abrasive assisted brush deburring of microgrooves International Journal of Machine Tools & Manufacture. ,vol. 57, pp. 46- 54 ,(2012) , 10.1016/J.IJMACHTOOLS.2012.02.007
Ping Guo, Yong Lu, Kornel F. Ehmann, Jian Cao, Generation of hierarchical micro-structures for anisotropic wetting by elliptical vibration cutting Cirp Annals-manufacturing Technology. ,vol. 63, pp. 553- 556 ,(2014) , 10.1016/J.CIRP.2014.03.048
Fernando Brandão de Oliveira, Alessandro Roger Rodrigues, Reginaldo Teixeira Coelho, Adriano Fagali de Souza, Size effect and minimum chip thickness in micromilling International Journal of Machine Tools & Manufacture. ,vol. 89, pp. 39- 54 ,(2015) , 10.1016/J.IJMACHTOOLS.2014.11.001
Suet To, Guoqing Zhang, Study of cutting force in ultra-precision raster milling of V-groove The International Journal of Advanced Manufacturing Technology. ,vol. 75, pp. 967- 978 ,(2014) , 10.1007/S00170-014-6200-1
G. Bissacco, H.N. Hansen, L. De Chiffre, Micromilling of hardened tool steel for mould making applications Journal of Materials Processing Technology. ,vol. 167, pp. 201- 207 ,(2005) , 10.1016/J.JMATPROTEC.2005.05.029
H.T. Wang, W.B. Lee, J. Chan, S. To, Numerical and experimental analysis of heat transfer in turbulent flow channels with two-dimensional ribs Applied Thermal Engineering. ,vol. 75, pp. 623- 634 ,(2015) , 10.1016/J.APPLTHERMALENG.2014.10.039
M.H. Parsa, S. Nasher al ahkami, M. Ettehad, Experimental and finite element study on the spring back of double curved aluminum/polypropylene/aluminum sandwich sheet Materials & Design. ,vol. 31, pp. 4174- 4183 ,(2010) , 10.1016/J.MATDES.2010.04.024
Haci Saglam, Faruk Unsacar, Suleyman Yaldiz, Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperature International Journal of Machine Tools & Manufacture. ,vol. 46, pp. 132- 141 ,(2006) , 10.1016/J.IJMACHTOOLS.2005.05.002