The Properties of Recycled Copper Filled Epoxy/Unsaturated Polyester Composites
作者： J.L. Phua , P.L. Teh , A.G. Supri , C.K. Yeoh , S.N. Ishak
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.795.407
关键词:
摘要: A blend system between two different thermoset polymer, epoxy and unsaturated polyester at ratio 80/20 weight percentage (wt. %) with 10, 20, 30 40 volume (vol. of recycled copper powder as conductive filler was investigated. The polymer composites were undergone some characterization testing which include flexural properties, hardness, thermal stability, electrical properties scanning electron microscopy (SEM). strength the unfilled decreased increasing content. With increase copper, from 0 vol.% to vol.%, a total 350% increment in modulus observed. stability increased loading, 140°C 300°C, 5% loss onset degradation temperature. conductivity composite shown percolation threshold content, where change insulator conductor.
sci-hub.se 参考文章(17)
William Lowrie, Fundamentals of geophysics fuge. pp. 368- ,(2007) , 10.1017/CBO9780511807107
Eric Bogatin, Signal Integrity - Simplified ,(2003)
Sepehr Ravati, Basil D. Favis, Low percolation threshold conductive device derived from a five-component polymer blend Polymer. ,vol. 51, pp. 3669- 3684 ,(2010) , 10.1016/J.POLYMER.2010.06.015
Yeon Seok Kim, John B. Wright, Jaime C. Grunlan, Influence of polymer modulus on the percolation threshold of latex-based composites Polymer. ,vol. 49, pp. 570- 578 ,(2008) , 10.1016/J.POLYMER.2007.11.035
Tsung-Han Ho, Tsu-Shang Leu, Yih-Min Sun, Jeng-Yueh Shieh, Thermal degradation kinetics and flame retardancy of phosphorus-containing dicyclopentadiene epoxy resins Polymer Degradation and Stability. ,vol. 91, pp. 2347- 2356 ,(2006) , 10.1016/J.POLYMDEGRADSTAB.2006.04.002
G. Tagliavia, M. Porfiri, N. Gupta, Analysis of flexural properties of hollow-particle filled composites Composites Part B-engineering. ,vol. 41, pp. 86- 93 ,(2010) , 10.1016/J.COMPOSITESB.2009.03.004
Ye.P. Mamunya, V.V. Davydenko, P. Pissis, E.V. Lebedev, Electrical and thermal conductivity of polymers filled with metal powders European Polymer Journal. ,vol. 38, pp. 1887- 1897 ,(2002) , 10.1016/S0014-3057(02)00064-2
V.V Vysotsky, V.I Roldughin, Aggregate structure and percolation properties of metal-filled polymer films Colloids and Surfaces A: Physicochemical and Engineering Aspects. ,vol. 160, pp. 171- 180 ,(1999) , 10.1016/S0927-7757(99)00355-6
A.S. Luyt, J.A. Molefi, H. Krump, Thermal, mechanical and electrical properties of copper powder filled low-density and linear low-density polyethylene composites Polymer Degradation and Stability. ,vol. 91, pp. 1629- 1636 ,(2006) , 10.1016/J.POLYMDEGRADSTAB.2005.09.014
Michael A. Berger, R.L. McCullough, Characterization and analysis of the electrical properties of a metal-filled polymer Composites Science and Technology. ,vol. 22, pp. 81- 106 ,(1985) , 10.1016/0266-3538(85)90078-8