A method for dynamic simulation of air-gap eccentricity in induction machines
作者： H.A. Toliyat , M.S. Arefeen , A.G. Parlos
DOI: 10.1109/28.511649
关键词:
摘要: In this paper, a method is proposed which enables the simulation of air-gap eccentricity in induction machines. The based on coupled magnetic circuit approach. model derived by means winding functions, and no symmetry windings layout assumed. parameters are calculated directly from geometry machine. effect included calculation machine inductances. It shown that proper modeling motor it possible to determine startup, whether running off sinusoidal supply or converter. Theoretical foundations technique, as well detailed differential equations describing performance under rotor presented.
sci-hub.se 参考文章(11)
G.B. Kliman, R.A. Koegl, J. Stein, R.D. Endicott, M.W. Madden, Noninvasive detection of broken rotor bars in operating induction motors IEEE Transactions on Energy Conversion. ,vol. 3, pp. 873- 879 ,(1988) , 10.1109/60.9364
A.J. Ellison, S.J. Yang, Effects of rotor eccentricity on acoustic noise from induction machines Proceedings of the Institution of Electrical Engineers. ,vol. 118, pp. 174- 184 ,(1971) , 10.1049/PIEE.1971.0028
P.J. Tavner, B.G. Gaydon, D.M. Ward, Monitoring generators and large motors IEE Proceedings B Electric Power Applications. ,vol. 133, pp. 169- 180 ,(1986) , 10.1049/IP-B.1986.0024
S. Williamson, K. Mirzoian, Analysis of Cage Induction Motors with Stator Winding Faults IEEE Power & Energy Magazine. ,vol. 104, pp. 1838- 1842 ,(1985) , 10.1109/TPAS.1985.319221
R.J. Patton, J. Chen, On-line residual compensation in robust fault diagnosis of dynamic systems Annual Review in Automatic Programming. ,vol. 17, pp. 221- 227 ,(1992) , 10.1016/S0066-4138(09)91037-0
H.A. Toliyat, T.A. Lipo, Transient analysis of cage induction machines under stator, rotor bar and end ring faults IEEE Transactions on Energy Conversion. ,vol. 10, pp. 241- 247 ,(1995) , 10.1109/60.391888
Ikuro Morita, Air gap flux analysis for cage rotor diagnosis Electrical Engineering in Japan. ,vol. 112, pp. 171- 181 ,(1992) , 10.1002/EEJ.4391120318
J.R. Cameron, W.T. Thomson, A.B. Dow, Vibration and current monitoring for detecting airgap eccentricity in large induction motors IEE Proceedings B Electric Power Applications. ,vol. 133, pp. 155- 163 ,(1986) , 10.1049/IP-B.1986.0022
J. Sottile, J.L. Kohler, An on-line method to detect incipient failure of turn insulation in random-wound motors IEEE Transactions on Energy Conversion. ,vol. 8, pp. 762- 768 ,(1993) , 10.1109/60.260992
R.R. Schoen, T.G. Habetler, Effects of time-varying loads on rotor fault detection in induction machines ieee industry applications society annual meeting. ,vol. 31, pp. 900- 906 ,(1993) , 10.1109/28.395302