摘要: Aluminium alloys have extensive application in industries. The range of physical properties that can be imparted to them is remarkable. Addition Silicon helps increase their strength and wear resistance. Al-Si are extensivelyused industrial applications due better tribological properties. In the present work,an attempt has been made study three as-cast alloy samples i.e Al-7wt%Si, Al-10wt%Si Al-14wt%Si. Wear tests were conducted using a pin-on-disc type testing machine(DUCOM friction monitor) after metallographic examination followed by hardness measurement.The operational parameters varied percentage content alloy, normal load,sliding velocity, sliding distance lubrication. was higher at increased velocity load. found increasing with decreasing content. SEM characterisation done. Interestingly, under lubricated condition higher. interaction platelets boundary might possible reason.
参考文章(11)
G. Rajaram, S. Kumaran, T. Srinivasa Rao, High temperature tensile and wear behaviour of aluminum silicon alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 528, pp. 247- 253 ,(2010) , 10.1016/J.MSEA.2010.09.020
H. Torabian, J.P. Pathak, S.N. Tiwari, Wear characteristics of Al-Si alloys Wear. ,vol. 172, pp. 49- 58 ,(1994) , 10.1016/0043-1648(94)90298-4
S.A. Kori, T.M. Chandrashekharaiah, Studies on the dry sliding wear behaviour of hypoeutectic and eutectic Al–Si alloys Wear. ,vol. 263, pp. 745- 755 ,(2007) , 10.1016/J.WEAR.2006.11.026
Tuti Yasmin, Asad A. Khalid, M.M. Haque, Tribological (wear) properties of aluminum–silicon eutectic base alloy under dry sliding condition Journal of Materials Processing Technology. ,vol. 153, pp. 833- 838 ,(2004) , 10.1016/J.JMATPROTEC.2004.04.147
D Odabaş, Ş Su, A comparison of the reciprocating and continuous two-body abrasive wear behavior of solution-treated and age-hardened 2014 Al alloy Wear. ,vol. 208, pp. 25- 35 ,(1997) , 10.1016/S0043-1648(96)07378-4
Litian Hu, Jianmin Chen, Weimin Liu, Qunji Xue, Czeslaw Kajdas, Investigation of tribochemical behavior of Al–Si alloy against itself lubricated by amines Wear. ,vol. 243, pp. 60- 67 ,(2000) , 10.1016/S0043-1648(00)00423-3
Dheerendra Kumar Dwivedi, Wear behaviour of cast hypereutectic aluminium silicon alloys Materials & Design. ,vol. 27, pp. 610- 616 ,(2006) , 10.1016/J.MATDES.2004.11.029
V.C. Srivastava, R.K. Mandal, S.N. Ojha, Evolution of microstructure in spray formed Al–18%Si alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 383, pp. 14- 20 ,(2004) , 10.1016/J.MSEA.2004.02.031
K Kato, Classification of wear mechanisms/models Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ,vol. 216, pp. 349- 355 ,(2002) , 10.1243/135065002762355280
A. R. Daud, Mariyam Jameelah Ghazali, A. S. Anasyida, DRY SLIDING WEAR BEHAVIOUR OF Al-4Si-4Mg ALLOYS BY ADDITION OF CERIUM International Journal of Mechanical and Materials Engineering. ,vol. 4, pp. 127- 130 ,(2009)