MINIMIZATION OF THE SHAPE ERROR IN THE INTERRUPTED GRINDING PROCESS BY USING TAGUCHI METHOD
作者： M. Kurt , U. Köklü
DOI: 10.5755/J01.MECH.18.6.3163
关键词:
摘要: Formos paklaidų atsiranda trūkiame pavirsiuje slifavimo proceso metu. Siame darbe yra istirta disko grūdelių dydžio, gylio, stalo greicio ir skersinės pastūmos įtaka formos tikslumui trūkaus atveju. Eksperimentiniams tyrimams pasirinktas liejamasis plienas GS-C25. Variantų analizės metodu atliktas pjovimo parametrų įtakos rinkinio bei signalo triuksmo santykio įvertinimas. rezultatai parodė, kad procesui daugiausia turi dydis, gylis, greitis skersinė pastūma. Įvertintos ismatuotos reiksmės gana artimos viena kitai, kas rodo, taikant regresine analize sukurtas modelis gali būti efektyviai panaudotas paklaidoms slifuojant nuspėti. DOI: http://dx.doi.org/10.5755/j01.mech.18.6.3163
sci-hub.se 参考文章(15)
Mustafa Kurt, Eyup Bagci, Yusuf Kaynak, Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes. The International Journal of Advanced Manufacturing Technology. ,vol. 40, pp. 458- 469 ,(2009) , 10.1007/S00170-007-1368-2
Tadao Kagiwada, Tadahiko Kanauchi, Three-dimensional thermal deformation and thermal stress in workpieces under surface grinding Journal of Thermal Stresses. ,vol. 8, pp. 305- 318 ,(1985) , 10.1080/01495738508942238
A.D. Sosa, M.D. Echeverría, O.J. Moncada, J.A. Sikora, Residual stresses, distortion and surface roughness produced by grinding thin wall ductile iron plates International Journal of Machine Tools & Manufacture. ,vol. 47, pp. 229- 235 ,(2007) , 10.1016/J.IJMACHTOOLS.2006.04.004
M. Gavas, İ. Karacan, E. Kaya, A NOVEL METHOD TO IMPROVE SURFACE QUALITY IN CYLINDRICAL GRINDING Experimental Techniques. ,vol. 35, pp. 26- 32 ,(2011) , 10.1111/J.1747-1567.2009.00575.X
V. Ostasevicius, M. Ubartas, R. Gaidys, V. Jurenas, S. Samper, R. Dauksevicius, Numerical–experimental identification of the most effective dynamic operation mode of a vibration drilling tool for improved cutting performance Journal of Sound and Vibration. ,vol. 331, pp. 5175- 5190 ,(2012) , 10.1016/J.JSV.2012.07.007
Hitoshi Ohmori, Y. Dai, Wei Min Lin, Tomoyuki Suzuki, Kazutoshi Katahira, Nobuhide Itoh, Akitake Makinouchi, Hirofumi Tashiro, Force Characteristics and Deformation Behaviors of Sintered SiC during an ELID Grinding Process Key Engineering Materials. pp. 65- 70 ,(2003) , 10.4028/WWW.SCIENTIFIC.NET/KEM.238-239.65
Jae Seob Kwak, In Kwan Kim, Parameter Optimization of Surface Grinding Process Based on Taguchi and Response Surface Methods Key Engineering Materials. pp. 709- 714 ,(2006) , 10.4028/WWW.SCIENTIFIC.NET/KEM.306-308.709
Jae-Seob Kwak, Application of Taguchi and response surface methodologies for geometric error in surface grinding process International Journal of Machine Tools & Manufacture. ,vol. 45, pp. 327- 334 ,(2005) , 10.1016/J.IJMACHTOOLS.2004.08.007
K. Palanikumar, Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling The International Journal of Advanced Manufacturing Technology. ,vol. 36, pp. 19- 27 ,(2008) , 10.1007/S00170-006-0811-0
HH Tsai, H Hocheng, None, Monitoring Strategy of Thermal-Induced Convex Deformation of Workpiece in Surface Grinding The International Journal of Advanced Manufacturing Technology. ,vol. 17, pp. 710- 714 ,(2001) , 10.1007/S001700170115