Carbon/epoxy filament wound composite drive shafts under torsion and compression
作者： Paulo Stedile Filho , José Humberto S Almeida , Sandro C Amico
关键词:
摘要: Composite cylinders to be used as half shafts must satisfy several requirements, such critical speed, buckling torque, and load carrying ability. This study focused on the investigation...
sagepub.com
harvard.edu
sci-hub.se 参考文章(17)
M. R. Khoshravan, A. Paykani, Design of a Composite Drive Shaft and its Coupling for Automotive Application Journal of Applied Research and Technology. ,vol. 10, pp. 826- 834 ,(2012) , 10.22201/ICAT.16656423.2012.10.6.342
M.A. Badie, E. Mahdi, A.M.S. Hamouda, An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft Materials & Design. ,vol. 32, pp. 1485- 1500 ,(2011) , 10.1016/J.MATDES.2010.08.042
I. Barsoum, F. Khan, Z. Barsoum, Analysis of the torsional strength of hardened splined shafts Materials & Design (1980-2015). ,vol. 54, pp. 130- 136 ,(2014) , 10.1016/J.MATDES.2013.08.020
S.A. Mutasher, Prediction of the torsional strength of the hybrid aluminum/composite drive shaft Materials & Design. ,vol. 30, pp. 215- 220 ,(2009) , 10.1016/J.MATDES.2008.05.024
Charles W. Bert, Chun-Do Kim, Analysis of buckling of hollow laminated composite drive shafts Composites Science and Technology. ,vol. 53, pp. 343- 351 ,(1995) , 10.1016/0266-3538(95)00006-2
Dai Gil Lee, Hak Sung Kim, Jong Woon Kim, Jin Kook Kim, Design and manufacture of an automotive hybrid aluminum/composite drive shaft Composite Structures. ,vol. 63, pp. 87- 99 ,(2004) , 10.1016/S0263-8223(03)00136-3
O.A. Bauchau, T.M. Krafchack, J.F. Hayes, Torsional Buckling Analysis and Damage Tolerance of Graphite/Epoxy Shafts Journal of Composite Materials. ,vol. 22, pp. 258- 270 ,(1988) , 10.1177/002199838802200304
E.F. Masur, Buckling, post-buckling and limit analysis of completely symmetric elastic structures International Journal of Solids and Structures. ,vol. 6, pp. 587- 604 ,(1970) , 10.1016/0020-7683(70)90032-6
O. Montagnier, Ch. Hochard, Optimisation of hybrid high-modulus/high-strength carbon fibre reinforced plastic composite drive shafts Materials & Design. ,vol. 46, pp. 88- 100 ,(2013) , 10.1016/J.MATDES.2012.09.035
Ömer Civalek, Analysis of Thick Rectangular Plates with Symmetric Cross-ply Laminates Based on First-order Shear Deformation Theory Journal of Composite Materials. ,vol. 42, pp. 2853- 2867 ,(2008) , 10.1177/0021998308096952