Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features
作者： Kishore , Ravi Shankar , S. Sankaran
DOI: 10.1002/APP.22098
关键词:
摘要: … coupling agent were significantly better compared to untreated silane-coupling agent … Paraffin oil was used to coat the hollow glass microballoons by evaporation condensation method. …
sci-hub.se 参考文章(19)
Kulkarni, Kishore, Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites Journal of Materials Science. ,vol. 37, pp. 4321- 4326 ,(2002) , 10.1023/A:1020648418233
J?Z Liang, R?K?Y Li, Effect of filler content and surface treatment on the tensile properties of glass-bead-filled polypropylene composites Polymer International. ,vol. 49, pp. 170- 174 ,(2000) , 10.1002/(SICI)1097-0126(200002)49:2<170::AID-PI322>3.0.CO;2-U
A. Calahorra, O. Gara, S. Kenig, Thin film Parylene coating of three-phase syntactic foams Journal of Cellular Plastics. ,vol. 23, pp. 383- 398 ,(1987) , 10.1177/0021955X8702300402
J.M. Thorp, Friction of some commercial polymer-based bearing materials against steel Tribology International. ,vol. 15, pp. 69- 74 ,(1982) , 10.1016/0301-679X(82)90055-X
Manwar Hussain, Atsushi Nakahira, Shigehiro Nishijima, Koichi Niihara, Effects of coupling agents on the mechanical properties improvement of the TiO2 reinforced epoxy system Materials Letters. ,vol. 26, pp. 299- 303 ,(1996) , 10.1016/0167-577X(95)00253-7
Jingfang Zhou, Zhishen Wu, Zhijun Zhang, Weimin Liu, Hongxin Dang, Study on an antiwear and extreme pressure additive of surface coated LaF3 nanoparticles in liquid paraffin Wear. ,vol. 249, pp. 333- 337 ,(2001) , 10.1016/S0043-1648(00)00547-0
Weijiu Huang, Yuanqiang Tan, Junxiu Dong, Boshui Chen, Tribological properties of the film formed by borated dioctyl dithiocarbamate as an additive in liquid paraffin Tribology International. ,vol. 35, pp. 787- 791 ,(2002) , 10.1016/S0301-679X(02)00028-2
Jayamol George, M. S. Sreekala, Sabu Thomas, A review on interface modification and characterization of natural fiber reinforced plastic composites Polymer Engineering and Science. ,vol. 41, pp. 1471- 1485 ,(2001) , 10.1002/PEN.10846
Shang-Lin Gao, Jang-Kyo Kim, Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion Composites Part A-applied Science and Manufacturing. ,vol. 31, pp. 517- 530 ,(2000) , 10.1016/S1359-835X(00)00009-9
V.K. Iya, A.B. Majali, Development of radiation processed wood-polymer composites based on tropical hardwoods Radiation Physics and Chemistry (1977). ,vol. 12, pp. 107- 110 ,(1978) , 10.1016/0146-5724(78)90066-3