Investigation on localized corrosion of 304 stainless steel joints brazed using Sn-plated Ag alloy filler in NaCl aqueous solution
作者： Xingxing Wang , Shuai Li , Jin Peng
关键词:
摘要:
harvard.edu
sci-hub.se 参考文章(10)
W.M. Long, G.X. Zhang, Q.K. Zhang, In situ synthesis of high strength Ag brazing filler metals during induction brazing process Scripta Materialia. ,vol. 110, pp. 41- 43 ,(2016) , 10.1016/J.SCRIPTAMAT.2015.07.041
Qingke ZHANG, Yinyin PEI, Weimin LONG, INVESTIGATIONS ON FORMATION MECHANISMS OF BRAZING CRACKS AT THE AUSTENITIC STAINLESS STEEL/FILLER METAL BRAZING JOINT INTERFACES Acta Metallurgica Sinica. ,vol. 49, pp. 1177- 1184 ,(2013) , 10.3724/SP.J.1037.2013.00219
Ricardo Manuel Souto, Y Ait Albrimi, A Ait Addi, J Douch, M Hamdani, Inhibition of the pitting corrosion of 304 stainless steel in 0.5 M hydrochloric acid solution by heptamolybdate ions Corrosion Science. ,vol. 90, pp. 522- 528 ,(2015) , 10.1016/J.CORSCI.2014.10.023
Shu-Xin Li, Lei Li, Shu-Rong Yu, R. Akid, Hong-Bo Xia, Investigation of intergranular corrosion of 316L stainless steel diffusion bonded joint by electrochemical potentiokinetic reactivation Corrosion Science. ,vol. 53, pp. 99- 104 ,(2011) , 10.1016/J.CORSCI.2010.09.027
Xiaofei Yu, Shenhao Chen, Ying Liu, Fengfeng Ren, A study of intergranular corrosion of austenitic stainless steel by electrochemical potentiodynamic reactivation, electron back-scattering diffraction and cellular automaton Corrosion Science. ,vol. 52, pp. 1939- 1947 ,(2010) , 10.1016/J.CORSCI.2010.02.015
M. G. Li, D. Q. Sun, X. M. Qiu, S. Q. Yin, Effect of tin on melting temperature and microstructure of Ag–Cu–Zn–Sn filler metals Materials Science and Technology. ,vol. 21, pp. 1318- 1322 ,(2005) , 10.1179/174328405X66932
Fangfei Sui, Weimin Long, Shengxin Liu, Guanxing Zhang, Li Bao, Hao Li, Yong Chen, Effect of calcium on the microstructure and mechanical properties of brazed joint using Ag–Cu–Zn brazing filler metal Materials & Design. ,vol. 46, pp. 605- 608 ,(2013) , 10.1016/J.MATDES.2012.11.021
Chaoli Ma, Songbai Xue, Bo Wang, Study on novel Ag-Cu-Zn-Sn brazing filler metal bearing Ga Journal of Alloys and Compounds. ,vol. 688, pp. 854- 862 ,(2016) , 10.1016/J.JALLCOM.2016.07.255
Xiangyu Zhong, Shirish Chandrakant Bali, Tetsuo Shoji, Accelerated test for evaluation of intergranular stress corrosion cracking initiation characteristics of non-sensitized 316 austenitic stainless steel in simulated pressure water reactor environment Corrosion Science. ,vol. 115, pp. 106- 117 ,(2017) , 10.1016/J.CORSCI.2016.11.019
V. Karki, M. Singh, Investigation of corrosion mechanism in Type 304 stainless steel under different corrosive environments: A SIMS study International Journal of Mass Spectrometry. ,vol. 421, pp. 51- 60 ,(2017) , 10.1016/J.IJMS.2017.06.001