The effect of clay catalyst on the chemical composition of bio-oil obtained by co-pyrolysis of cellulose and polyethylene.

作者: Agnieszka Solak , Piotr Rutkowski

DOI: 10.1016/J.WASMAN.2013.10.036

关键词:

摘要: Cellulose/polyethylene (CPE) mixture 3:1, w/w with and without three clay catalysts (K10 - montmorillonite K10, KSF KSF, B Bentonite) addition were subjected to pyrolysis at temperatures 400, 450 500°C heating rate of 100°C/s produce bio-oil high yield. The pyrolytic oil yield was in the range 41.3-79.5 wt% depending on temperature, type amount catalyst. non-catalytic fast gives highest (79.5 wt%). higher temperature catalytic cellulose/polyethylene is. Contrarily, increasing results significant, almost linear decrease followed by a significant increase gas CPE has various influence distribution components. K10 promotes deepest conversion polyethylene cellulose. Additionally, more saturated than unsaturated hydrocarbons are present resultant bio-oils. proportion liquid is when acting as

参考文章(27)
Dekui Shen, Rui Xiao, Sai Gu, Huiyan Zhang, The Overview of Thermal Decomposition of Cellulose in Lignocellulosic Biomass InTech. ,(2013) , 10.5772/51883
Richard H. Furneaux, Jennifer M. Mason, Ian J. Miller, A novel hydroxylactone from the Lewis acid catalysed pyrolysis of cellulose Journal of The Chemical Society-perkin Transactions 1. pp. 49- 51 ,(1988) , 10.1039/P19880000049
Mihai Brebu, Suat Ucar, Cornelia Vasile, Jale Yanik, Co-pyrolysis of pine cone with synthetic polymers Fuel. ,vol. 89, pp. 1911- 1918 ,(2010) , 10.1016/J.FUEL.2010.01.029
V.I Sharypov, N.G Beregovtsova, B.N Kuznetsov, L Membrado, V.L Cebolla, N Marin, J.V Weber, Co-pyrolysis of wood biomass and synthetic polymers mixtures. Part III: Characterisation of heavy products Journal of Analytical and Applied Pyrolysis. ,vol. 67, pp. 325- 340 ,(2003) , 10.1016/S0165-2370(02)00071-2
Piotr Rutkowski, Pyrolytic behavior of cellulose in presence of montmorillonite K10 as catalyst Journal of Analytical and Applied Pyrolysis. ,vol. 98, pp. 115- 122 ,(2012) , 10.1016/J.JAAP.2012.07.012
A. Aboulkas, K. El Harfi, A. El Bouadili, Non-isothermal kinetic studies on co-processing of olive residue and polypropylene Energy Conversion and Management. ,vol. 49, pp. 3666- 3671 ,(2008) , 10.1016/J.ENCONMAN.2008.06.029
Pedro Castaño, Gorka Elordi, Martin Olazar, Andres T. Aguayo, Bárbara Pawelec, Javier Bilbao, Insights into the coke deposited on HZSM-5, Hβ and HY zeolites during the cracking of polyethylene Applied Catalysis B-environmental. ,vol. 104, pp. 91- 100 ,(2011) , 10.1016/J.APCATB.2011.02.024
Ahmet Korkmaz, Jale Yanik, Mihai Brebu, Cornelia Vasile, Pyrolysis of the tetra pak. Waste Management. ,vol. 29, pp. 2836- 2841 ,(2009) , 10.1016/J.WASMAN.2009.07.008
N Marin, S Collura, V.I Sharypov, N.G Beregovtsova, S.V Baryshnikov, B.N Kutnetzov, V Cebolla, J.V Weber, Copyrolysis of wood biomass and synthetic polymers mixtures. Part II: characterisation of the liquid phases Journal of Analytical and Applied Pyrolysis. ,vol. 65, pp. 41- 55 ,(2002) , 10.1016/S0165-2370(01)00179-6
Richard French, Stefan Czernik, Catalytic pyrolysis of biomass for biofuels production Fuel Processing Technology. ,vol. 91, pp. 25- 32 ,(2010) , 10.1016/J.FUPROC.2009.08.011