Accurate orientation relationship between ferrite and austenite in low carbon martensite and granular bainite

作者: M.-X. Zhang , P.M. Kelly

DOI: 10.1016/S1359-6462(02)00196-3

关键词:

摘要: Convergent beam Kikuchi diffraction was used to accurately determine the orientation relationships (ORs) between austenite and martensite, granular bainite in two Fe-Ni-Mn-C alloys. Both martensite have same crystallographic characteristics with OR: (111)(A)parallel to(101)(F), [1 (1) over bar0](A) 2.5degrees +/- 2degrees from bar(1) bar](B).

参考文章(17)
Patrick M. Kelly, Crystallography of lath martensite in steels Materials Transactions Jim. ,vol. 33, pp. 235- 242 ,(1992) , 10.2320/MATERTRANS1989.33.235
A. Crosky, P.G. McDougall, J.S. Bowles, The crystallography of the precipitation of α rods from β Cu-Zn alloys Acta Metallurgica. ,vol. 28, pp. 1495- 1504 ,(1980) , 10.1016/0001-6160(80)90050-4
K. R. Kinsman, Transformation and Hardenability in Steels Climax Molybdenum Co., Ann Arbor. pp. 39- ,(1967)
Yasuya Ohmori, Microstructural Evolutions with Precipitation of Carbides in Steels Isij International. ,vol. 41, pp. 554- 565 ,(2001) , 10.2355/ISIJINTERNATIONAL.41.554
Yasuya Ohmori, Yun-Chul Jung, Hiroaki Ueno, Kiyomichi Nakai, Hiroyuki Ohtsubo, Crystallographic Analysis of Upper Bainite in Fe-9%Ni–C Alloys Materials Transactions Jim. ,vol. 37, pp. 1665- 1671 ,(1996) , 10.2320/MATERTRANS1989.37.1665
M.-X. Zhang, P.M. Kelly, Crystallography of spheroidite and tempered martensite Acta Materialia. ,vol. 46, pp. 4081- 4091 ,(1998) , 10.1016/S1359-6454(98)00046-9
M.-X Zhang, P.M Kelly, Crystallography and morphology of Widmanstätten cementite in austenite Acta Materialia. ,vol. 46, pp. 4617- 4628 ,(1998) , 10.1016/S1359-6454(98)00139-6
C.M Wayman, J.E Hanafee, T.A Read, On the crystallography of martensite the “{225}” transformation in alloys of iron Acta Metallurgica. ,vol. 9, pp. 391- 402 ,(1961) , 10.1016/0001-6160(61)90133-X
P.M. Kelly, A. Jostsons, R.G. Blake, The orientation relationship between lath martensite and austenite in low carbon, low alloy steels Acta Metallurgica et Materialia. ,vol. 38, pp. 1075- 1081 ,(1990) , 10.1016/0956-7151(90)90180-O