Method and system for bluetooth low power link layer connection setup

作者: Brima Ibrahim , Prasanna Desai

DOI:

关键词:

摘要: A mobile device such as a Bluetooth low energy (BLE) detects out-of-band blocking signals and manages packet transmission in associated BLE link layer connections based on the detected signals. The is operable to measure RSSI detect interferences. compares measured with an profile LTE or WiMAX determine indicating cadence periodic traffic activities. remote deice (advertiser) aperiodically periodically transmits advertising for specific connection. If not connected within determined time period, reduces power transmitting packet. receives sends connection request (advertiser).

参考文章(16)
Jeyhan Karaoguz, John Walley, Brima Ibrahim, Christopher Hansen, Nandagopalan Saishankar, Robert Hulvey, Raymond Hayes, Shawn Ding, Method and system for bluetooth 802.11 alternate mac/phy (amp) transmit power control (tpc) ,(2009)
Sunghyun Choi, Amjad Soomro, Stefan Mangold, DYNAMIC FREQUENCY SELECTION SCHEME FOR IEEE 802.11 WLANs ,(2002)
Thomas F. Smaidris, Edward Carl Gerhardt, R. Brent Saunders, William R. Highsmith, Gregory M. Powell, Larry W. Koos, David M. Odom, Radio communication system employing spectral reuse transceivers ,(2003)
Seizo Onoe, Shinji Ueda, Yasuhiro Kato, Akihiro Maebara, Yutaka Ohto, Takehiro Nakamura, Wireless channel setting method for mobile communication system and mobile communication control apparatus ,(2003)
William R. Seed, Thomas H. Scholl, Neil R. Diener, Karl A. Miller, System and method for management of a shared frequency band ,(2003)
Ray Wang, Peter Petersen, Christian Volf Olgaard, Method for testing data packet transceiver using loop back packet generation ,(2008)
Hannu Häkkinen, Harri Holma, Power control in mobile communications system ,(1998)
Jarkko Kneckt, Janne Marin, Mika Kasslin, Wireless network including post groupcast time ,(2009)