Intensive Shear Deformation in Billets During Forging with Specially Formed Anvils
作者： Iaroslav G Zhbankov , Alexander V Perig , None
DOI: 10.1080/10426914.2013.763974
关键词:
摘要: Classification of forging schemes which involve intensive shear deformation in the billet have been proposed. An investigation stress-strain state during by anvils with slant has done. The influence such parameters as relative feed, anvil stroke, and angle on strain process determined. Recommendations regimes form angle, rotation sequence made. feasibility a 41Cr4 steel slanted round shaft was confirmed experimentally, advantages this new scheme over traditional flat identified.
sci-hub.se 参考文章(19)
G. Niewielski, D. Kuc, Technological plasticity and structure in stainless steels during hot-working Journal of achievements in materials and manufacturing engineering. ,vol. 32, pp. 154- 161 ,(2009)
J. Chen, K. Chandrashekhara, V. L. Richards, S. N. Lekakh, Three-Dimensional Nonlinear Finite Element Analysis of Hot Radial Forging Process for Large Diameter Tubes Materials and Manufacturing Processes. ,vol. 25, pp. 669- 678 ,(2010) , 10.1080/10426910903536790
H. Dyja, G. Banaszek, S. Berski, S. Mróz, Effect of symmetrical and asymmetrical forging processes on the quality of forged products Journal of Materials Processing Technology. ,vol. 157, pp. 496- 501 ,(2004) , 10.1016/J.JMATPROTEC.2004.07.109
C.Y. Park, D.Y. Yang, A study of void crushing in large forgings Journal of Materials Processing Technology. ,vol. 72, pp. 32- 41 ,(1997) , 10.1016/S0924-0136(97)00126-X
H. Mirzadeh, J.M. Cabrera, A. Najafizadeh, P.R. Calvillo, EBSD study of a hot deformed austenitic stainless steel Materials Science and Engineering: A. ,vol. 538, pp. 236- 245 ,(2012) , 10.1016/J.MSEA.2012.01.037
Kun Chen, Yitao Yang, Guangjie Shao, Kejia Liu, Strain function analysis method for void closure in the forging process of the large-sized steel ingot Computational Materials Science. ,vol. 51, pp. 72- 77 ,(2012) , 10.1016/J.COMMATSCI.2011.07.011
S.K. Choi, M.S. Chun, C.J. Van Tyne, Y.H. Moon, Optimization of open die forging of round shapes using FEM analysis Journal of Materials Processing Technology. ,vol. 172, pp. 88- 95 ,(2006) , 10.1016/J.JMATPROTEC.2005.09.010
G. Banaszek, A. Stefanik, Theoretical and laboratory modelling of the closure of metallurgical defects during forming of a forging Journal of Materials Processing Technology. ,vol. 177, pp. 238- 242 ,(2006) , 10.1016/J.JMATPROTEC.2006.04.023
G. Banaszek, P. Szota, A comprehensive numerical analysis of the effect of relative feed during the operation of stretch forging of large ingots in profiled anvils Journal of Materials Processing Technology. ,vol. 169, pp. 437- 444 ,(2005) , 10.1016/J.JMATPROTEC.2005.03.018
Hai-Liang Yu, Xiang-Hua Liu, Thermal–Mechanical Finite Element Analysis of Evolution of Surface Cracks During Slab Rolling Materials and Manufacturing Processes. ,vol. 24, pp. 570- 578 ,(2009) , 10.1080/10426910902746895