Boiling heat transfer during flow of distilled water in an asymmetrically heated rectangular minichannel
作者： Kinga Strąk , Magdalena Piasecka
DOI: 10.1051/EPJCONF/201714302116
关键词:
摘要: This paper discusses test results concerning flow boiling heat transfer in a minichannel 1.7 mm depth, 16 width and 180 length. The essential part of the experimental stand was vertically oriented rectangular minichannel, which heated asymmetrically with plate made Haynes-230 alloy. Distilled water used as cooling fluid. Changes temperature on outer side central, axially symmetric channel were measured using infrared thermography. Simultaneously, other contact fluid observed through glass pane to identify two-phase patterns. one-dimensional model for analysis took into account direction, perpendicular direction minichannel. study involved determining local values coefficient generating curves. data compared findings reported FC-72
harvard.edu
sci-hub.se 参考文章(22)
B. Grabas, Vibration-assisted laser surface texturing of metals as a passive method for heat transfer enhancement Experimental Thermal and Fluid Science. ,vol. 68, pp. 499- 508 ,(2015) , 10.1016/J.EXPTHERMFLUSCI.2015.06.006
Magdalena Piasecka, Beata Maciejewska, Heat transfer coefficient during flow boiling in a minichannel at variable spatial orientation Experimental Thermal and Fluid Science. ,vol. 68, pp. 459- 467 ,(2015) , 10.1016/J.EXPTHERMFLUSCI.2015.05.005
Slawomir Blasiak, Andriy V. Zahorulko, A parametric and dynamic analysis of non-contacting gas face seals with modified surfaces Tribology International. ,vol. 94, pp. 126- 137 ,(2016) , 10.1016/J.TRIBOINT.2015.08.014
Chirag R. Kharangate, Christopher Konishi, Issam Mudawar, Consolidated methodology to predicting flow boiling critical heat flux for inclined channels in Earth gravity and for microgravity International Journal of Heat and Mass Transfer. ,vol. 92, pp. 467- 482 ,(2016) , 10.1016/J.IJHEATMASSTRANSFER.2015.08.018
Hai Trieu Phan, Nadia Caney, Philippe Marty, Stéphane Colasson, Jérôme Gavillet, Flow boiling of water in a minichannel: The effects of surface wettability on two-phase pressure drop Applied Thermal Engineering. ,vol. 31, pp. 1894- 1905 ,(2011) , 10.1016/J.APPLTHERMALENG.2011.02.036
Magdalena Piasecka, Robert Pastuszko, Pool boiling on surfaces with mini-fins and micro-cavities Journal of Physics: Conference Series. ,vol. 395, pp. 012137- ,(2012) , 10.1088/1742-6596/395/1/012137
Ewelina Sobierska, Rudi Kulenovic, Rainer Mertz, Heat transfer mechanism and flow pattern during flow boiling of water in a vertical narrow channel—experimental results International Journal of Thermal Sciences. ,vol. 46, pp. 1172- 1181 ,(2007) , 10.1016/J.IJTHERMALSCI.2007.06.011
Magdalena Piasecka, Correlations for flow boiling heat transfer in minichannels with various orientations International Journal of Heat and Mass Transfer. ,vol. 81, pp. 114- 121 ,(2015) , 10.1016/J.IJHEATMASSTRANSFER.2014.09.063
Norbert Radek, Konrad Bartkowiak, Laser Treatment of Cu-Mo Electro-Spark Deposited Coatings Physics Procedia. ,vol. 12, pp. 499- 505 ,(2011) , 10.1016/J.PHPRO.2011.03.061
K.H. Bang, K.K. Kim, S.K. Lee, B.W. Lee, Pressure effect on flow boiling heat transfer of water in minichannels International Journal of Thermal Sciences. ,vol. 50, pp. 280- 286 ,(2011) , 10.1016/J.IJTHERMALSCI.2010.03.011