Machining Property in Smoothing of Steeply Curved Surfaces by Elastic Emission Machining
作者： Takahiro Hirata , Yoshinori Takei , Hidekazu Mimura
DOI: 10.1016/J.PROCIR.2014.04.034
关键词:
摘要: In optics fields, an extremely smooth surface with a complex form is necessary for the lens and mirror used in advanced optical systems, although their surfaces are still difficult to polish. Here, we describe the machining of steeply curved surfaces by rotating-sphere EEM (elastic emission machining). Thus far, the use of rotating-sphere EEM has been limited to flat and gradually curved surfaces in spite of its high performance. We demonstrated the successful application of rotating-sphere EEM to a glass cylinder, resulting in a decrease in …
core.ac.uk
sci-hub.se 参考文章(11)
M Kanaoka, C Liu, K Nomura, M Ando, H Takino, Y Fukuda, H Mimura, K Yamauchi, Y Mori, None, Figuring and smoothing capabilities of elastic emission machining for low-thermal-expansion glass optics Journal of Vacuum Science & Technology B. ,vol. 25, pp. 2110- 2113 ,(2007) , 10.1116/1.2789440
Akihisa Kubota, Hidekazu Mimura, Kouji Inagaki, Yuzo Mori, Kazuto Yamauchi, Effect of Particle Morphology on Removal Rate and Surface Topography in Elastic Emission Machining Journal of The Electrochemical Society. ,vol. 153, ,(2006) , 10.1149/1.2220068
Masahiko Kanaoka, Hideo Takino, Kazushi Nomura, Yuzo Mori, Hidekazu Mimura, Kazuto Yamauchi, Removal properties of low-thermal-expansion materials with rotating-sphere elastic emission machining Science and Technology of Advanced Materials. ,vol. 8, pp. 170- 172 ,(2007) , 10.1016/J.STAM.2006.12.003
Akihisa Kubota, Hidekazu Mimura, Kouji Inagaki, Kenta Arima, Yuzo Mori, Kazuto Yamauchi, Preparation of ultrasmooth and defect-free 4H-SiC(0001) surfaces by elastic emission machining Journal of Electronic Materials. ,vol. 34, pp. 439- 443 ,(2005) , 10.1007/S11664-005-0124-3
Kazuto Yamauchi, Kikuji Hirose, Hidekazu Goto, Kazuhisa Sugiyama, Koji Inagaki, Kazuya Yamamura, Yasuhisa Sano, Yuzo Mori, First-principles simulations of removal process in EEM (Elastic Emission Machining) Computational Materials Science. ,vol. 14, pp. 232- 235 ,(1999) , 10.1016/S0927-0256(98)00112-8
Marc Tricard, Dan Bajuk, Practical Examples of FreeForm Optics Renewable Energy and the Environment (2013), paper FT3B.2. ,(2013) , 10.1364/FREEFORM.2013.FT3B.2
Yoshinori Takei, Hidekazu Mimura, 100 μm-size stationary spot machining in elastic emission machining International Journal of Nanomanufacturing. ,vol. 10, pp. 244- ,(2014) , 10.1504/IJNM.2014.060795
Hidekazu Mimura, Soichiro Handa, Takashi Kimura, Hirokatsu Yumoto, Daisuke Yamakawa, Hikaru Yokoyama, Satoshi Matsuyama, Kouji Inagaki, Kazuya Yamamura, Yasuhisa Sano, Kenji Tamasaku, Yoshinori Nishino, Makina Yabashi, Tetsuya Ishikawa, Kazuto Yamauchi, Breaking the 10 nm barrier in hard-X-ray focusing Nature Physics. ,vol. 6, pp. 122- 125 ,(2010) , 10.1038/NPHYS1457
Yuzo MORI, Kazuto YAMAUCHI, Hidekazu MIMURA, Kouji INAGAKI, Akihisa KUBOTA, Katsuyoshi ENDO, EEM(Elastic Emission Machining)によるSi(001)表面の平坦化（第1報） Journal of the Japan Society for Precision Engineering, Contributed Papers. ,vol. 70, pp. 391- 396 ,(2004) , 10.2493/JSPE.70.391
Kazuto YAMAUCHI, Toshihiko KATAOKA, Katsuyoshi ENDO, Kouji INAGAKI, Kazuhisa SUGIYAMA, Syuji MAKINO, Yuzo MORI, EEM (Elastic Emission Machining) に関する研究 Journal of The Japan Society for Precision Engineering. ,vol. 64, pp. 907- 912 ,(1998) , 10.2493/JJSPE.64.907