Phase transition and interface evolution of Al2O3/ZrO2 particles in plasma-sprayed coatings

作者: Taihong Huang , Peng Song , Chao Li , Yongchun Shu , Benshuang Sun

DOI: 10.1016/J.CERAMINT.2020.01.277

关键词:

摘要: Abstract Alumina and zirconia ceramic particles exhibit high hardness excellent wear resistance at temperature, hence are used as reinforcement phases in some plasma sprayed coatings. In this study, the interface evolution of a zirconia/alumina eutectic phase transition plasma-sprayed coating were investigated. Scanning electron microscopy transmission combined with focused-ion beam energy dispersive X-ray to analyze microstructure composition interface. The results showed that consisted alumina (outer) columnar (inner) before after spraying process. inner part martensitic transformation t-type stripe-like m-type zirconia. After spraying, between changed significantly, which formed new oxide layer. mechanism particle layer formation alumina/zirconia

参考文章(32)
Xin Zhou, Binglin Zou, Limin He, Zhenhua Xu, Jiaying Xu, Rende Mu, Xueqiang Cao, Hot corrosion behaviour of La2(Zr0.7Ce0.3)2O7 thermal barrier coating ceramics exposed to molten calcium magnesium aluminosilicate at different temperatures Corrosion Science. ,vol. 100, pp. 566- 578 ,(2015) , 10.1016/J.CORSCI.2015.08.031
Muhammad Yasir, Cheng Zhang, Wei Wang, Peng Xu, Lin Liu, None, Wear behaviors of Fe-based amorphous composite coatings reinforced by Al2O3 particles in air and in NaCl solution Materials & Design. ,vol. 88, pp. 207- 213 ,(2015) , 10.1016/J.MATDES.2015.08.142
Pablo Carpio, Amparo Borrell, María Dolores Salvador, Andrés Gómez, Eduardo Martínez, Enrique Sánchez, Microstructure and mechanical properties of plasma spraying coatings from YSZ feedstocks comprising nano- and submicron-sized particles Ceramics International. ,vol. 41, pp. 4108- 4117 ,(2015) , 10.1016/J.CERAMINT.2014.11.106
Xiaoqin Zhao, Yulong An, Jianmin Chen, Huidi Zhou, Bin Yin, Properties of Al2O3–40 wt.% ZrO2 composite coatings from ultra-fine feedstocks by atmospheric plasma spraying Wear. ,vol. 265, pp. 1642- 1648 ,(2008) , 10.1016/J.WEAR.2008.03.019
Richard H. J. Hannink, Patrick M. Kelly, Barry C. Muddle, Transformation Toughening in Zirconia‐Containing Ceramics Journal of the American Ceramic Society. ,vol. 83, pp. 461- 487 ,(2004) , 10.1111/J.1151-2916.2000.TB01221.X
K. Bobzin, F. Ernst, K. Richardt, T. Schlaefer, C. Verpoort, G. Flores, Thermal spraying of cylinder bores with the Plasma Transferred Wire Arc process Surface & Coatings Technology. ,vol. 202, pp. 4438- 4443 ,(2008) , 10.1016/J.SURFCOAT.2008.04.023
Nitin P Padture, Maurice Gell, Eric H Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications Science. ,vol. 296, pp. 280- 284 ,(2002) , 10.1126/SCIENCE.1068609
Heidy L. Calambás Pulgarin, María P. Albano, Sintering, microstrusture and hardness of different alumina–zirconia composites Ceramics International. ,vol. 40, pp. 5289- 5298 ,(2014) , 10.1016/J.CERAMINT.2013.10.102
J.A. Haynes, K.L. More, Bruce A. Pint, Ian G. Wright, K. Cooley, Y. Zhang, Effects of Platinum Additions on the Adherence of Alumina Scales to CVD Aluminide Bond Coatings Materials Science Forum. pp. 679- 686 ,(2001) , 10.4028/WWW.SCIENTIFIC.NET/MSF.369-372.679
M. Sharifitabar, J. Vahdati Khaki, M. Haddad Sabzevar, Microstructure and wear resistance of in-situ TiC–Al2O3 particles reinforced Fe-based coatings produced by gas tungsten arc cladding Surface & Coatings Technology. ,vol. 285, pp. 47- 56 ,(2016) , 10.1016/J.SURFCOAT.2015.11.019