Mimosa tannin resins for impregnated paper overlays
作者： Ummi Hani Abdullah , A. Pizzi , K. Rode , L. Delmotte , X. Zhou
DOI: 10.1007/S00107-012-0652-5
关键词:
摘要: The surface quality of plywood coated with resin impregnated papers based on tannin/furfuryl alcohol resins was studied. Several hardeners such as hexamine, paraformaldehyde, formurea and a mixture paraformaldehyde were added in small quantities to mimosa resin. Papers tannin + furfuryl or found yield excellent results standard water vapour resistance cross-cut tests. Matrix assisted laser desorption ionization time flight (MALDI-TOF) mass spectrometry cross-polarisation-magic angle spinning NMR (CP-MAS 13C NMR) used show coreaction even self condensation under alkaline conditions, well formaldehyde-yielding compounds hexamine both aromatic rings the ring alcohol. Some more important oligomers formed identified by MALDI-TOF.
springer.com
univ-lorraine.fr
sci-hub.se 参考文章(14)
Roland E. Kreibich, TANNIN-BASED WOOD ADHESIVES Springer, Boston, MA. pp. 457- 478 ,(1989) , 10.1007/978-1-4684-7511-1_29
P.F. Pallett, Formwork and Falsework Advanced Concrete Technology. pp. 3- 27 ,(2003) , 10.1016/B978-075065686-3/50306-2
Alessandro Gandini, Mohamed Naceur Belgacem, Monomers, polymers and composites from renewable resources Elsevier. ,(2008)
Deniz Aydemir, Abdullah Istek, Soner Aksu, THE EFFECT OF DÉCOR PAPER AND RESIN TYPE ON THE PHYSICAL, MECHANICAL, AND SURFACE QUALITY PROPERTIES OF PARTICLEBOARDS COATED WITH IMPREGNATED DÉCOR PAPERS Bioresources. ,vol. 5, pp. 1074- 1083 ,(2010)
A. Pizzi, G. Tondi, H. Pasch, A. Celzard, Matrix‐assisted laser desorption/ionization time‐of‐flight structure determination of complex thermoset networks: Polyflavonoid tannin–furanic rigid foams Journal of Applied Polymer Science. ,vol. 110, pp. 1451- 1456 ,(2008) , 10.1002/APP.28545
H. Pasch, A. Pizzi, K. Rode, MALDI-TOF mass spectrometry of polyflavonoid tannins Polymer. ,vol. 42, pp. 7531- 7539 ,(2001) , 10.1016/S0032-3861(01)00216-6
Gökay Nemli, Factors affecting some quality properties of the decorative surface overlays Journal of Materials Processing Technology. ,vol. 195, pp. 218- 223 ,(2008) , 10.1016/J.JMATPROTEC.2007.05.001
Gökay Nemli, Mustafa Usta, Influences of some manufacturing factors on the important quality properties of melamine-impregnated papers Building and Environment. ,vol. 39, pp. 567- 570 ,(2004) , 10.1016/J.BUILDENV.2003.12.008
A. Pizzi, R. Kueny, F. Lecoanet, B. Massetau, D. Carpentier, A. Krebs, F. Loiseau, S. Molina, M. Ragoubi, High resin content natural matrix–natural fibre biocomposites Industrial Crops and Products. ,vol. 30, pp. 235- 240 ,(2009) , 10.1016/J.INDCROP.2009.03.013
Raymond Roberts, Philip David Evans, Effects of manufacturing variables on surface quality and distribution of melamine formaldehyde resin in paper laminates Composites Part A-applied Science and Manufacturing. ,vol. 36, pp. 95- 104 ,(2005) , 10.1016/J.COMPOSITESA.2003.05.001