The three-dimensional simulation and optimization of an integrated power system for reformer–PrOx–fuel cell modeling
作者： Jiin-Yuh Jang , Chin-Hsiang Cheng , Yu-Xian Huang
DOI: 10.1016/J.IJHYDENE.2012.03.139
关键词:
摘要: Abstract The present study is aimed at integrating a power system for reformer, PrOx and PEM fuel cells using simulation model. A three-dimensional numerical model established predicting the effects of channel patterns inlet outlet manifold configuration with fixed flow rate on reformer. Distributions velocity, gases concentrations current density are predicted, methanol conversion ratios evaluated as well. In addition, mole fraction CO contained removed in reformer reactions, respectively. solution used to improve design both micro cell. Results showed that can be decreased through reaction effectively; furthermore, ratio concentration hydrogen improved from 83% 99% 67.11% 74.4%, Additionally, relative standard deviations velocity channels 58.68% 0.048%, according design; point view cell, high usage obtained z-serpentine pattern. increased by 184% basis steam Design 1 2.
elsevier.com
sci-hub.se 参考文章(37)
Hung-Hsiang Lin, Chin-Hsiang Cheng, Chyi-Yeou Soong, Falin Chen, Wei-Mon Yan, Optimization of key parameters in the proton exchange membrane fuel cell Journal of Power Sources. ,vol. 162, pp. 246- 254 ,(2006) , 10.1016/J.JPOWSOUR.2006.06.054
Xinrong Zhang, Pengfei Shi, Production of hydrogen by steam reforming of methanol on CeO2 promoted Cu/Al2O3 catalysts Journal of Molecular Catalysis A-chemical. ,vol. 194, pp. 99- 105 ,(2003) , 10.1016/S1381-1169(02)00464-8
S. Balaji, S. Lakshminarayanan, Improved Design of Microchannel Plate Geometry for Uniform Flow Distribution The Canadian Journal of Chemical Engineering. ,vol. 84, pp. 715- 721 ,(2008) , 10.1002/CJCE.5450840610
Chin-Hsiang Cheng, Hung-Hsiang Lin, Guang-Jer Lai, Numerical prediction of the effect of catalyst layer Nafion loading on the performance of PEM fuel cells Journal of Power Sources. ,vol. 164, pp. 730- 741 ,(2007) , 10.1016/J.JPOWSOUR.2006.11.039
Gu-Gon Park, Sung-Dae Yim, Young-Gi Yoon, Won-Yong Lee, Chang-Soo Kim, Dong-Joo Seo, Koichi Eguchi, Hydrogen production with integrated microchannel fuel processor for portable fuel cell systems Journal of Power Sources. ,vol. 145, pp. 702- 706 ,(2005) , 10.1016/J.JPOWSOUR.2005.01.080
Yongtaek Choi, Harvey G. Stenger, Fuel cell grade hydrogen from methanol on a commercial Cu/ZnO/Al2O3 catalyst Applied Catalysis B-environmental. ,vol. 38, pp. 259- 269 ,(2002) , 10.1016/S0926-3373(02)00054-1
Xiao-Dong Wang, Xin-Xin Zhang, Wei-Mon Yan, Duu-Jong Lee, Ay Su, Non-isothermal effects of single or double serpentine proton exchange membrane fuel cells Electrochimica Acta. ,vol. 55, pp. 4926- 4934 ,(2010) , 10.1016/J.ELECTACTA.2010.03.092
H Purnama, T Ressler, R.E Jentoft, H Soerijanto, R Schlögl, R Schomäcker, CO Formation/Selectivity for steam reforming of methanol with a commercial CuO/ZnO/Al2O3 catalyst Applied Catalysis A-general. ,vol. 259, pp. 83- 94 ,(2004) , 10.1016/J.APCATA.2003.09.013
Xiao-Dong Wang, Xin-Xin Zhang, Tao Liu, Yuan-Yuan Duan, Wei-Mon Yan, Duu-Jong Lee, Channel Geometry Effect for Proton Exchange Membrane Fuel Cell With Serpentine Flow Field Using a Three-Dimensional Two-Phase Model Journal of Fuel Cell Science and Technology. ,vol. 7, pp. 051019- ,(2010) , 10.1115/1.4000849
Oh Joong Kwon, Sun-Mi Hwang, Je Hyun Chae, Moo Seong Kang, Jae Jeong Kim, Performance of a miniaturized silicon reformer-PrOx-fuel cell system Journal of Power Sources. ,vol. 165, pp. 342- 346 ,(2007) , 10.1016/J.JPOWSOUR.2006.11.074