Experimental investigation of the scaling laws for metal plates struck by large masses
作者： He-Ming Wen , Norman Jones
DOI: 10.1016/0734-743X(93)90120-V
关键词:
摘要: … The velocity of the striker or the velocity at the impact point of a plate was measured by means of a laser Doppler velocimeter [-23]. It is assumed that the striker is in continuous contact …
elsevier.com
sci-hub.se 参考文章(18)
T.A. Duffey, SCALING LAWS FOR FUEL CAPSULES SUBJECTED TO BLAST, IMPACT, AND THERMAL LOADING. intersociety energy conversion engineering conference. ,(1971)
Y.-W. Mai, Discussion on “A study of the quasi-static tearing of thin metal sheets” by T. X. Yu, D. J. Zhang, Y. Zhang and Q. Zhou International Journal of Mechanical Sciences. ,vol. 31, pp. 75- 76 ,(1989) , 10.1016/0020-7403(89)90120-3
W. S. Jouri, A STUDY OF PLATE TEARING FOR SHIP COLLISION AND GROUNDING DAMAGE Journal of Ship Research. ,vol. 31, pp. 253- 268 ,(1987) , 10.5957/JSR.1987.31.4.253
N Jones, STRUCTURAL ASPECTS OF SHIP COLLISIONS STRUCTURAL CRASHWORTHINESS. ,(1983)
J N Goodier, W T Thomson, Applicability of Similarity Principles to Structural Models ,(1944)
R S Birch, N Jones, W S Jouri, Performance Assessment of an Impact Rig Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ,vol. 202, pp. 275- 285 ,(1988) , 10.1243/PIME_PROC_1988_202_120_02
T.X. Yu, D.J. Zhang, Y. Zhang, Q. Zhou, A study of the quasi-static tearing of thin metal sheets International Journal of Mechanical Sciences. ,vol. 30, pp. 193- 202 ,(1988) , 10.1016/0020-7403(88)90054-9
A.G Atkins, Scaling in combined plastic flow and fracture International Journal of Mechanical Sciences. ,vol. 30, pp. 173- 191 ,(1988) , 10.1016/0020-7403(88)90053-7
W.S. Jouri, Norman Jones, The impact behaviour of aluminium alloy and mild steel double-shear specimens International Journal of Mechanical Sciences. ,vol. 30, pp. 153- 172 ,(1988) , 10.1016/0020-7403(88)90052-5
R S Birch, N Jones, Measurement of Impact Loads using a Laser Doppler Velocimeter Archive: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23). ,vol. 204, pp. 1- 8 ,(1990) , 10.1243/PIME_PROC_1990_204_069_02