Effects of waste eggshells and SiC addition on specific strength and thermal expansion of hybrid green metal matrix composite
作者： Satpal Sharma , Shashi Prakash Dwivedi
DOI: 10.1016/J.JHAZMAT.2017.01.002
关键词:
摘要: Chicken eggshell waste is an industrial byproduct, and its disposal constitutes a serious environmental hazard. can be used in commercial products to produce new materials with low cost density. Low density material which sustain at higher temperature remarkable area of research. Keeping these facts the mind, present investigation aims study physical behaviour, specific strength thermal expansion AA2014/SiC/carbonized hybrid green metal matrix composites. Microstructure shows that reinforcement particles (SiC particulates carbonized eggshells particles) are uniformly distributed AA2014 alloy. Specific for composites containing 2.5wt.% SiC up 7.5wt.% was observed than other selected While same composition (AA2014/2.5% SiC/7.5% composites), porosity lower The results revealed sample AA2014/2.5% showed minimum cross sectional reduction after 450°C among all samples. Overall costs were also calculated.
cheric.org参考文章(31)
Pardeep Sharma, Satpal Sharma, Dinesh Khanduja, None, A study on microstructure of aluminium matrix composites Journal of Asian Ceramic Societies. ,vol. 3, pp. 240- 244 ,(2015) , 10.1016/J.JASCER.2015.04.001
Pardeep Sharma, Satpal Sharma, Dinesh Khanduja, Production and some properties of Si3N4 reinforced aluminium alloy composites Journal of Asian Ceramic Societies. ,vol. 3, pp. 352- 359 ,(2015) , 10.1016/J.JASCER.2015.07.002
Pardeep Sharma, Satpal Sharma, Dinesh Khanduja, Effect of graphite reinforcement on physical and mechanical properties of aluminum metal matrix composites Particulate Science and Technology. ,vol. 34, pp. 17- 22 ,(2016) , 10.1080/02726351.2015.1031924
Irfan Aziz, Zhang Qi, Xiang Min, Corrosion Inhibition of SiCp/5A06 Aluminum Metal Matrix Composite by Cerium Conversion Treatment Chinese Journal of Aeronautics. ,vol. 22, pp. 670- 676 ,(2009) , 10.1016/S1000-9361(08)60157-0
SP Dwivedi, Sudhir Kumar, Ajay Kumar, None, Effect of turning parameters on surface roughness of A356/5% SiC composite produced by electromagnetic stir casting Journal of Mechanical Science and Technology. ,vol. 26, pp. 3973- 3979 ,(2012) , 10.1007/S12206-012-0914-5
Patricio Toro, Raúl Quijada, Mehrdad Yazdani-Pedram, José Luis Arias, Eggshell, a new bio-filler for polypropylene composites Materials Letters. ,vol. 61, pp. 4347- 4350 ,(2007) , 10.1016/J.MATLET.2007.01.102
Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra, Effects of roller burnishing process parameters on surface roughness of A356/5%SiC composite using response surface methodology Advances in Manufacturing. ,vol. 2, pp. 303- 317 ,(2014) , 10.1007/S40436-014-0083-0
Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra, Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting Journal of The Brazilian Society of Mechanical Sciences and Engineering. ,vol. 37, pp. 57- 67 ,(2014) , 10.1007/S40430-014-0138-Y
S.B. Hassan, V.S. Aigbodion, Effects of eggshell on the microstructures and properties of Al-Cu-Mg/eggshell particulate composites Journal of King Saud University: Engineering Sciences. ,vol. 27, pp. 49- 56 ,(2015) , 10.1016/J.JKSUES.2013.03.001
J.Udaya Prakash, T.V. Moorthy, J. Milton Peter, Experimental Investigations on Machinability of Aluminium Alloy (A413)/Flyash/B4C Hybrid Composites Using Wire EDM Procedia Engineering. ,vol. 64, pp. 1344- 1353 ,(2013) , 10.1016/J.PROENG.2013.09.216