Effects of burn-off on thermal shock resistances of nuclear carbon materials

作者: A. Kurumada , T. Oku , K. Harada , K. Kawamata , S. Sato

DOI: 10.1016/S0008-6223(97)00088-2

关键词:

摘要: Abstract The purpose of this study is to evaluate the effects burn-off on thermal shock resistances and fracture toughnesses a carbon fiber reinforced composite (C/C composite) three fine-grained isotropic graphites. These were degraded slightly by air oxidation at 500 °C. extents degradations parameters less than those mechanical mechanics properties, however, they larger that diffusivity. In observations microstructures surfaces after graphites, size number pores increased rough due boundaries graphite particles. After C/C composite, there preferential removal boundary layer between pyrolytic matrix pull out fiber.

参考文章(10)
C. R. Thomas, Essentials of carbon-carbon composites Royal Society of Chemistry. ,(1993)
G. Grieger, Advances in the mechanical and thermal design of fusion reactors Nuclear Engineering and Design. ,vol. 134, pp. 109- 120 ,(1992) , 10.1016/0029-5493(92)90009-K
Sennosuke Sato, Kazujiro Sato, Yoshio Imamura, Jun-ichi Kon, Determination of the thermal shock resistance of graphite by arc discharge heating Carbon. ,vol. 13, pp. 309- 316 ,(1975) , 10.1016/0008-6223(75)90035-4
S. Sato, K. Hirakawa, A. Kurumada, S. Kimura, E. Yasuda, Degradation of fracture mechanics properties of reactor graphite due to burn-off Nuclear Engineering and Design. ,vol. 118, pp. 227- 241 ,(1990) , 10.1016/0029-5493(90)90060-B
S. Sato, K. Hirakawa, A. Kurumada, S. Kimura, E. Yasuda, Degradation of Fracture Mechanics Properties of Graphite due to Burn-off Carbon. ,vol. 1984, pp. 153- 164 ,(1984) , 10.7209/TANSO.1984.153
Shintaro ISHIYAMA, Motokuni ETO, Tatsuo OKU, Effect of oxidation in air on fatigue strength of fine-grained isotropic graphite for HTGR. Journal of the Atomic Energy Society of Japan. ,vol. 29, pp. 651- 655 ,(1987) , 10.3327/JAESJ.29.651
Akira KURUMADA, Tatsuo OKU, Katsuya HARADA, Sennosuke SATO, Toshiharu HIRAOKA, Effects of Burn-Off on Strengths and Toughnesses of Carbon Materials. Transactions of the Japan Society of Mechanical Engineers. A. ,vol. 63, pp. 838- 844 ,(1997) , 10.1299/KIKAIA.63.838