Influences of precursor constitution and processing speed on microstructure and wear behavior during laser clad composite coatings on γ-TiAl intermetallic alloy
作者： Xiu-Bo Liu , Rong-Li Yu
DOI: 10.1016/J.MATDES.2008.04.066
关键词:
摘要: The effects of constitution precursor mixed powders and scan speed on microstructure wear properties were designed investigated during laser clad gamma/Cr7C3/TiC composite coatings gamma-TiAl intermetallic alloy substrates with NiCr-Cr3C2 powders. results indicate that both the beam rate have remarkable influence attendant hardness as well resistance formed coatings. mechanisms original TiAl investigated. coating an optimum compromise between being processed under moderate exhibits best dry sliding test conditions. (C) 2008 Elsevier Ltd. All rights reserved.
irgrid.ac.cn
elsevier.com参考文章(18)
T. Novoselova, S. Malinov, W. Sha, Experimental study of the effects of heat treatment on microstructure and grain size of a gamma TiAl alloy Intermetallics. ,vol. 11, pp. 491- 499 ,(2003) , 10.1016/S0966-9795(03)00028-1
Tahar Sahraoui, Nour-Eddine Fenineche, Ghislain Montavon, Christian Coddet, Structure and wear behaviour of HVOF sprayed Cr3C2–NiCr and WC–Co coatings Materials & Design. ,vol. 24, pp. 309- 313 ,(2003) , 10.1016/S0261-3069(03)00059-1
Y.X. Yin, H.M. Wang, Microstructure and wear properties of laser clad Cuss/Cr5Si3 metal silicide composite coatings Applied Surface Science. ,vol. 253, pp. 1584- 1589 ,(2006) , 10.1016/J.APSUSC.2006.02.054
P.J. Maziasz, J.L. Wright, D.S. Easton, C.T. Liu, J.H. Schneibel, Tensile properties and fracture toughness of TiAl alloys with controlled microstructures Intermetallics. ,vol. 4, pp. 429- 440 ,(1996) , 10.1016/0966-9795(96)00047-7
T.S. Sidhu, S. Prakash, R.D. Agrawal, Hot corrosion studies of HVOF sprayed Cr3C2–NiCr and Ni–20Cr coatings on nickel-based superalloy at 900 °C Surface & Coatings Technology. ,vol. 201, pp. 792- 800 ,(2006) , 10.1016/J.SURFCOAT.2005.12.030
Xiu-Bo Liu, Hua-Ming Wang, Microstructure and tribological properties of laser clad γ/Cr7C3/TiC composite coatings on γ-TiAl intermetallic alloy Wear. ,vol. 262, pp. 514- 521 ,(2007) , 10.1016/J.WEAR.2006.06.012
C.T. Liu, P.J. Maziasz, Microstructural control and mechanical properties of dual-phase TiAl alloys Intermetallics. ,vol. 6, pp. 653- 661 ,(1998) , 10.1016/S0966-9795(98)00062-4
H.M Wang, Y.F Liu, Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 338, pp. 126- 132 ,(2002) , 10.1016/S0921-5093(02)00076-X
J.K.N. Murthy, B. Venkataraman, Abrasive wear behaviour of WC–CoCr and Cr3C2–20(NiCr) deposited by HVOF and detonation spray processes Surface & Coatings Technology. ,vol. 200, pp. 2642- 2652 ,(2006) , 10.1016/J.SURFCOAT.2004.10.136
Xiu-Bo Liu, Hua-Ming Wang, Modification of tribology and high-temperature behavior of Ti–48Al–2Cr–2Nb intermetallic alloy by laser cladding Applied Surface Science. ,vol. 252, pp. 5735- 5744 ,(2006) , 10.1016/J.APSUSC.2005.07.064