The effects of cryogenic-treated carbide tools on tool wear and surface roughness of turning of Hastelloy C22 based on Taguchi method
作者： Sıtkı Akıncıoğlu , Hasan Gökkaya , İlyas Uygur
DOI: 10.1007/S00170-015-7356-Z
关键词:
摘要: In this study, Taguchi method has been applied to evaluate the effect of cryogenically treated tools in turning Hastelloy C22 super alloy on surface roughness. The optimum parameters (cryogenic treatment, cutting speed, and feed rate) were determined by using experimental design method. method, L9 orthogonal array used determine signal noise (S/N) ratio. Analysis ANOVA was carried out identify significant factors affecting statistical analysis indicated that rate, with a contribution percentage as high 87.64 %, had most dominant machining performance, followed cryo-treated treatment respectively. confirmation tests it is possible improve roughness significantly Surface improved 28.3 72.3 % shallow (CT1) cryogenic deep (CT2) cementite carbide (UT). It found wear resistance tungsten insert increased treatments.
springer.com
researchgate.net 
sci-hub.se 参考文章(37)
V.P. Astakhov, V. Godlevskiy, Delivery of metalworking fluids in the machining zone Metalworking Fluids (MWFs) for Cutting and Grinding#R##N#Fundamentals and Recent Advances. pp. 79- 134 ,(2012) , 10.1533/9780857095305.79
Ali Riza Motorcu, The Optimization of Machining Parameters Using the Taguchi Method for Surface Roughness of AISI 8660 Hardened Alloy Steel Strojniski Vestnik-journal of Mechanical Engineering. ,vol. 56, pp. 391- 401 ,(2010) , 10.5545/119_DOI_NOT_ASSIGNED
Muammer Nalbant, Hasan Gökkaya, İhsan Toktaş, Gökhan Sur, The experimental investigation of the effects of uncoated, PVD- and CVD-coated cemented carbide inserts and cutting parameters on surface roughness in CNC turning and its prediction using artificial neural networks Robotics and Computer-Integrated Manufacturing. ,vol. 25, pp. 211- 223 ,(2009) , 10.1016/J.RCIM.2007.11.004
S. Hodges, N. J. Laycock, D. P. Krouse, S. Virtanen, P. Schmutz, M. P. Ryan, A Microelectrochemical Investigation of Alloy C22 in Chloride Solutions below the Critical Pitting Temperature Journal of The Electrochemical Society. ,vol. 154, ,(2007) , 10.1149/1.2401052
Turgay Kıvak, Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts Measurement. ,vol. 50, pp. 19- 28 ,(2014) , 10.1016/J.MEASUREMENT.2013.12.017
Cevdet Gologlu, Nazim Sakarya, The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method Journal of Materials Processing Technology. ,vol. 206, pp. 7- 15 ,(2008) , 10.1016/J.JMATPROTEC.2007.11.300
Adem Çiçek, Turgay Kıvak, Ilyas Uygur, Ergün Ekici, Yakup Turgut, Performance of cryogenically treated M35 HSS drills in drilling of austenitic stainless steels The International Journal of Advanced Manufacturing Technology. ,vol. 60, pp. 65- 73 ,(2012) , 10.1007/S00170-011-3616-8
G. Bellanger, J. J. Rameau, Behaviour of Hastelloy C22 steel in sulphate solutions at pH 3 and low temperatures Journal of Materials Science. ,vol. 31, pp. 2097- 2108 ,(1996) , 10.1007/BF00356632
Alakesh Manna, B. Bhattacharayya, Influence of machining parameters on the machinability of particulate reinforced Al/SiC–MMC The International Journal of Advanced Manufacturing Technology. ,vol. 25, pp. 850- 856 ,(2005) , 10.1007/S00170-003-1917-2
A. Rodríguez, L.N. López de Lacalle, A. Celaya, A. Lamikiz, J. Albizuri, Surface improvement of shafts by the deep ball-burnishing technique Surface & Coatings Technology. ,vol. 206, pp. 2817- 2824 ,(2012) , 10.1016/J.SURFCOAT.2011.11.045