Preparation of core–shell ion imprinted nanoparticles via photoinitiated polymerization at ambient temperature for dynamic removal of cobalt in aqueous solution

作者: Yan Liu , Guoxing Zhong , Zhanchao Liu , Minjia Meng , Yinhua Jiang

DOI: 10.1039/C5RA13224J

关键词:

摘要: In this work, novel core–shell ion imprinted polymers were firstly synthesized by photoinitiated polymerization (P-IIPs) for the selective separation of Co(II) in aqueous solution. contrast to thermal polymerization, exhibits faster initiation rate, only a quarter former, and can be performed at room temperature. Subsequently, extensive characterizations using FT-IR, SEM, TEM, XRD, TGA. Adsorption isotherm kinetics studies carried out batch adsorption experiments. Furthermore, removal from solution was investigated different conditions P-IIPs as adsorbent fixed-bed column parameters discussed optimized. The data well fitted Thomas model, offering some model process design. Compared with non-imprinted polymers, displayed remarkable selectivity toward Co(II). Moreover, possessed excellent desorption performance regeneration property efficiency up 94.1%. enabled extraction successfully sediment samples satisfactory recovery. above mentioned results indicate that are promising high-performance, low-energy environmentally friendly adsorbents effectively removing

参考文章(55)
Sergey A. Piletsky, Elena V. Piletska, Kal Karim, Keith W. Freebairn, Coulton H. Legge, Anthony P. F. Turner, Polymer cookery: Influence of polymerization conditions on the performance of molecularly imprinted polymers Macromolecules. ,vol. 35, pp. 7499- 7504 ,(2002) , 10.1021/MA0205562
Xuegang Luo, Zaifang Deng, Xiaoyan Lin, Chi Zhang, Fixed-bed column study for Cu2+ removal from solution using expanding rice husk Journal of Hazardous Materials. ,vol. 187, pp. 182- 189 ,(2011) , 10.1016/J.JHAZMAT.2011.01.019
Leonid S. Molochnikov, Elena G. Kovalyova, Andrei A. Zagorodni, Mamoun Muhammed, Yusif M. Sultanov, Aiaz A. Efendiev, Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation Polymer. ,vol. 44, pp. 4805- 4815 ,(2003) , 10.1016/S0032-3861(03)00500-7
Junfa Yin, Yue Cui, Gengliang Yang, Hailin Wang, Molecularly imprinted nanotubes for enantioselective drug delivery and controlled release Chemical Communications. ,vol. 46, pp. 7688- 7690 ,(2010) , 10.1039/C0CC01782E
Yannick Fuchs, Olivier Soppera, Karsten Haupt, Photopolymerization and photostructuring of molecularly imprinted polymers for sensor applications--a review. Analytica Chimica Acta. ,vol. 717, pp. 7- 20 ,(2012) , 10.1016/J.ACA.2011.12.026
Günter Wulff, Thomas Gross, Rainer Schönfeld, Enzyme Models Based on Molecularly Imprinted Polymers with Strong Esterase Activity Angewandte Chemie. ,vol. 36, pp. 1962- 1964 ,(1997) , 10.1002/ANIE.199719621
Mashaalah Zarejousheghani, Petra Fiedler, Monika Möder, Helko Borsdorf, Selective mixed-bed solid phase extraction of atrazine herbicide from environmental water samples using molecularly imprinted polymer Talanta. ,vol. 129, pp. 132- 138 ,(2014) , 10.1016/J.TALANTA.2014.05.034
S. Rengaraj, Seung-Hyeon Moon, Kinetics of adsorption of Co(II) removal from water and wastewater by ion exchange resins. Water Research. ,vol. 36, pp. 1783- 1793 ,(2002) , 10.1016/S0043-1354(01)00380-3
K. R. Hall, L. C. Eagleton, Andreas Acrivos, Theodore Vermeulen, Pore- and Solid-Diffusion Kinetics in Fixed-Bed Adsorption under Constant-Pattern Conditions Industrial & Engineering Chemistry Fundamentals. ,vol. 5, pp. 212- 223 ,(1966) , 10.1021/I160018A011