The effect of holding temperature on the strength of the diffusion bond of Ti-alloy and stainless steel through the ultrafine-grained interlayers of Ni and Ni-2%Cr alloy
作者： R G Khazgaliev , I I Ibragimova , M F Imayev , M Kh Mukhametrakhimov , R R Mulyukov
DOI: 10.1088/1757-899X/447/1/012051
关键词:
摘要: The manuscript considers the effect of diffusion bonding pressure, as well holding at different temperatures, on strength joints between titanium alloy and stainless steel, formed by through ultrafine-grained interlayers Ni Ni-2%Cr alloy. In samples with an interlayer nickel after 25 °C, maximum 380 MPa is achieved in pressure range 4-8 MPa. Ni-2%Cr, highest 490 a 12 700 °C for 20 minutes. case interlayer, joint falls more slowly than interlayer. mechanical properties are discussed terms chromium doping temperature transformation austenite to martensite TiNi intermetallic compound.
harvard.edu
sci-hub.st 参考文章(12)
S. Kundu, S. Chatterjee, Characterization of diffusion bonded joint between titanium and 304 stainless steel using a Ni interlayer Materials Characterization. ,vol. 59, pp. 631- 637 ,(2008) , 10.1016/J.MATCHAR.2007.05.015
S. Sam, S. Kundu, S. Chatterjee, Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: Interface microstructure and strength properties Materials & Design. ,vol. 40, pp. 237- 244 ,(2012) , 10.1016/J.MATDES.2012.02.058
Gopinath Thirunavukarasu, Sukumar Kundu, Brajendra Mishra, Subrata Chatterjee, Effect of Bonding Time on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material Metallurgical and Materials Transactions A. ,vol. 45, pp. 2078- 2090 ,(2014) , 10.1007/S11661-013-2135-7
S. Kundu, S. Chatterjee, D. Olson, B. Mishra, Effects of Intermetallic Phases on the Bond Strength of Diffusion-Bonded Joints between Titanium and 304 Stainless Steel Using Nickel Interlayer Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 38, pp. 2053- 2060 ,(2007) , 10.1007/S11661-007-9273-8
S. Kundu, S. Chatterjee, Interfacial microstructure and mechanical properties of diffusion-bonded titanium–stainless steel joints using a nickel interlayer Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 425, pp. 107- 113 ,(2006) , 10.1016/J.MSEA.2006.03.034
K. Otsuka, X. Ren, Physical metallurgy of Ti–Ni-based shape memory alloys Progress in Materials Science. ,vol. 50, pp. 511- 678 ,(2005) , 10.1016/J.PMATSCI.2004.10.001
S. Kundu, B. Mishra, D.L. Olson, S. Chatterjee, Interfacial reactions and strength properties of diffusion bonded joints of Ti64 alloy and 17-4PH stainless steel using nickel alloy interlayer Materials & Design. ,vol. 51, pp. 714- 722 ,(2013) , 10.1016/J.MATDES.2013.04.088
S. Kundu, G. Anand, S. Chatterjee, Diffusion Bonding of 17-4 Precipitation Hardening Stainless Steel to Ti Alloy With and Without Ni Alloy Interlayer: Interface Microstructure and Mechanical Properties Metallurgical and Materials Transactions A. ,vol. 44, pp. 2196- 2211 ,(2013) , 10.1007/S11661-012-1553-2
R. Kh. Khisamov, I. M. Safarov, R. R. Mulyukov, Yu. M. Yumaguzin, Effect of grain boundaries on the electron work function of nanocrystalline nickel Physics of the Solid State. ,vol. 55, pp. 1- 4 ,(2013) , 10.1134/S1063783413010186
J. Uchil, K.P. Mohanchandra, K. Ganesh Kumara, K.K. Mahesh, T. P. Murali, Thermal expansion in various phases of Nitinol using TMA Physica B-condensed Matter. ,vol. 270, pp. 289- 297 ,(1999) , 10.1016/S0921-4526(99)00186-6