Tribological Properties of Surface-Textured and Plasma-Nitrided Pure Titanium Under Oil Lubrication Condition
作者： Baosen Zhang , Qiangsheng Dong , Zhixin Ba , Zhangzhong Wang , Hancheng Shi
DOI: 10.1007/S11665-017-3100-1
关键词:
摘要: Plasma nitriding was conducted as post-treatment for surface texture on pure titanium to obtain a continuous layer. Supersonic fine particles bombarding (SFPB) carried out prepare texture. The morphologies and chemical composition were analyzed using scanning electron microscope energy disperse spectroscopy. microstructures of modified layers characterized by transmission microscope. tribological properties surface-textured duplex-treated under oil lubrication condition systematically investigated in the ball-on-plate reciprocating mode. effects applied load sliding velocity behavior analyzed. results show that after duplex treatments, grains size layer becomes slightly larger, hardness is obviously improved. Wear resistance significantly improved referenced untreated titanium, which 3.22 times much 2.15 respectively.
springer.com
harvard.edu
sci-hub.se 参考文章(29)
Fangxia Ye, Yunhua Xu, Mirabbos Hojamberdiev, Yujun Lai, Chong Wang, Xin Wang, Effect of Carbide Ceramic Zone on Wear Resistance of the (Fe,Cr) 7 C 3 /Fe Surface Gradient Composite Journal of Materials Engineering and Performance. ,vol. 24, pp. 2898- 2907 ,(2015) , 10.1007/S11665-015-1582-2
Wilhelm Pfleging, Renu Kumari, Heino Besser, Tim Scharnweber, Jyotsna Dutta Majumdar, Laser surface textured titanium alloy (Ti–6Al–4V): Part 1 – Surface characterization Applied Surface Science. ,vol. 355, pp. 104- 111 ,(2015) , 10.1016/J.APSUSC.2015.06.175
Renu Kumari, Tim Scharnweber, Wilhelm Pfleging, Heino Besser, Jyotsna Dutta Majumdar, Laser surface textured titanium alloy (Ti–6Al–4V) – Part II – Studies on bio-compatibility Applied Surface Science. ,vol. 357, pp. 750- 758 ,(2015) , 10.1016/J.APSUSC.2015.08.255
W.H. Kao, Y.L. Su, J.H. Horng, H.C. Huang, S.E. Yang, Improved tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy by gas-nitriding and Ti-C: H coating Surface & Coatings Technology. ,vol. 283, pp. 70- 79 ,(2015) , 10.1016/J.SURFCOAT.2015.10.035
Dingshun She, Wen Yue, Zhiqiang Fu, Chengbiao Wang, Xingkuan Yang, Jiajun Liu, Effects of nitriding temperature on microstructures and vacuum tribological properties of plasma-nitrided titanium Surface & Coatings Technology. ,vol. 264, pp. 32- 40 ,(2015) , 10.1016/J.SURFCOAT.2015.01.029
Benjamin D. Leonard, Farshid Sadeghi, Sachin Shinde, Marc Mittelbach, Rough surface and damage mechanics wear modeling using the combined finite-discrete element method Wear. ,vol. 305, pp. 312- 321 ,(2013) , 10.1016/J.WEAR.2012.12.034
F. Sun, J.Y. Zhang, M. Marteleur, C. Brozek, E.F. Rauch, M. Veron, P. Vermaut, P.J. Jacques, F. Prima, A new titanium alloy with a combination of high strength, high strain hardening and improved ductility Scripta Materialia. ,vol. 94, pp. 17- 20 ,(2015) , 10.1016/J.SCRIPTAMAT.2014.09.005
Dongqing He, Shaoxian Zheng, Jibin Pu, Guangan Zhang, Litian Hu, Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film Tribology International. ,vol. 82, pp. 20- 27 ,(2015) , 10.1016/J.TRIBOINT.2014.09.017
D.J. Wentink, D. Matthews, N.M. Appelman, E.M. Toose, A generic model for surface texture development, wear and roughness transfer in skin pass rolling Wear. ,vol. 328, pp. 167- 176 ,(2015) , 10.1016/J.WEAR.2015.02.015
Guoliang Hou, Jie Chen, Xiaoqin Zhao, Guang Liu, Huidi Zhou, Jianmin Chen, Yulong An, Microstructure and tribological properties of iron-based metallic glass coatings prepared by atmospheric plasma spraying Vacuum. ,vol. 107, pp. 132- 140 ,(2014) , 10.1016/J.VACUUM.2014.04.021