A procedure to design stacked microstrip patch antennas based on a simple network model
作者： J. Anguera , C. Puente , C. Borja
DOI: 10.1002/MOP.1248
关键词:
摘要: A stacked patch configuration has been demonstrated experimentally as a feasible solution to enhance the bandwidth of microstrip antenna, but little information on design procedure is available. scheme based simple network model presented. © 2001 John Wiley & Sons, Inc. Microwave Opt Technol Lett 30: 149–151, 2001.
sci-hub.se 参考文章(5)
P.S. Hall, Probe compensation in thick microstrip patches Electronics Letters. ,vol. 23, pp. 606- 607 ,(1987) , 10.1049/EL:19870434
H.F. Pues, A.R. Van de Capelle, An impedance-matching technique for increasing the bandwidth of microstrip antennas IEEE Transactions on Antennas and Propagation. ,vol. 37, pp. 1345- 1354 ,(1989) , 10.1109/8.43553
R.Q. Lee, K.F. Lee, J. Bobinchak, Characteristics of a two-layer electromagnetically coupled rectangular patch antenna Electronics Letters. ,vol. 23, pp. 1070- 1072 ,(1987) , 10.1049/EL:19870748
Wei Chen, Kai-Fong Lee, R. Q. Lee, Input impedance of coaxially fed rectangular microstrip antenna on electrically thick substrate Microwave and Optical Technology Letters. ,vol. 6, pp. 387- 390 ,(1993) , 10.1002/MOP.4650060616
H. Nakano, H. Tagami, J. Yamauchi, Numerical analysis of an axial-mode zigzag antenna Electronics Letters. ,vol. 21, pp. 606- 608 ,(1985) , 10.1049/EL:19850428