On the Foamability of AlSi12 Precursors Prepared by High Velocity Compaction
作者： Daniela Negri , Valerio Mussi , Simone Vezzù , Andrea Trentin , Silvano Rech
DOI: 10.1016/J.MSPRO.2014.07.582
关键词:
摘要: Abstract High Velocity Compaction (HVC) has been proposed as a cost-effective method to prepare foamable precursors and the feasibility of process demonstrated. The impact energy results key parameter control final precursor density. Increasing values leads continuous enhancement performances in terms maximum expansion stability foam up comparable those commercial Alulight® precursors.
core.ac.uk
sci-hub.se 参考文章(9)
Zhiqiao Yan, Feng Chen, Yixiang Cai, High-velocity compaction of titanium powder and process characterization Powder Technology. ,vol. 208, pp. 596- 599 ,(2011) , 10.1016/J.POWTEC.2010.12.026
L. Bonaccorsi, E. Proverbio, Powder Compaction Effect on Foaming Behavior of Uni‐Axial Pressed PM Precursors Advanced Engineering Materials. ,vol. 8, pp. 864- 869 ,(2006) , 10.1002/ADEM.200600082
Alan C.F. Cocks, Constitutive modelling of powder compaction and sintering Progress in Materials Science. ,vol. 46, pp. 201- 229 ,(2001) , 10.1016/S0079-6425(00)00017-7
Bruska Azhdar, Bengt Stenberg, Leif Kari, Development of a High-Velocity Compaction process for polymer powders Polymer Testing. ,vol. 24, pp. 909- 919 ,(2005) , 10.1016/J.POLYMERTESTING.2005.06.008
H.-M. Helwig, S. Hiller, F. Garcia-Moreno, J. Banhart, Influence of Compaction Conditions on the Foamability of AlSi8Mg4 Alloy Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science. ,vol. 40, pp. 755- 767 ,(2009) , 10.1007/S11663-009-9264-9
J. Hohlfeld, C. Hannemann, R. Vogel, T. Hipke, R. Neugebauer, Alternative starting materials for the production of aluminum foam by the powder metallurgical process Production Engineering. ,vol. 5, pp. 25- 30 ,(2011) , 10.1007/S11740-010-0271-0
A. R. Kennedy, Effect of compaction density on foamability of Al–TiH2 powder compacts Powder Metallurgy. ,vol. 45, pp. 75- 79 ,(2002) , 10.1179/003258902225001579
S. Asavavisithchai, A. R. Kennedy, The Effect of Compaction Method on the Expansion and Stability of Aluminium Foams Advanced Engineering Materials. ,vol. 8, pp. 810- 815 ,(2006) , 10.1002/ADEM.200600067
N. Kanetake, M. Kobashi, S. Tsuda, Foaming Behavior of Aluminum Precursor Produced from Machined Chip Waste Advanced Engineering Materials. ,vol. 10, pp. 840- 844 ,(2008) , 10.1002/ADEM.200800099