Reduction of residual stresses in polymer composites using nano-additives
作者： M.M. Shokrieh , S. Akbari , A. Daneshvar
DOI: 10.1533/9780857098597.2.350
关键词:
摘要: Abstract: This chapter discusses the reduction of residual stresses in polymer composites using nano-additives, especially carbon nanofibres (CNFs) and nanotubes (CNTs). First, a review conventional nano-additives their mechanical thermal properties was carried out. The main factors affecting values were studied. Then effects on coefficient expansion Young’s modulus matrix as formation discussed. last section this presents experimental results adding CNFs distribution carbon-fibre/epoxy laminated composites.
elsevier.com
sci-hub.se 参考文章(35)
John C Halpin, SW Tsai, Effects of Environmental Factors on Composite Materials. Defense Technical Information Center. ,(1969) , 10.21236/AD0692481
M.H. Loretto, R.E. Smallman, An assessment of high voltage electron microscopy (HVEM). An invited review Materials Science and Engineering. ,vol. 28, pp. 1- 32 ,(1977) , 10.1016/0025-5416(77)90085-4
Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu, Determination of residual stress in composite laminates using the incremental hole-drilling method Journal of Composite Materials. ,vol. 37, pp. 831- 844 ,(2003) , 10.1177/002199803031057
V. Bhargava, G. T. Hahn, C. A. Rubin, An Elastic-Plastic Finite Element Model of Rolling Contact, Part 2: Analysis of Repeated Contacts Journal of Applied Mechanics. ,vol. 52, pp. 75- 82 ,(1985) , 10.1115/1.3169030
J. Hodges, B. Yates, M. I. Darby, G. H. Wostenholm, J. F. Clemmet, T. F. Keates, Residual stresses and the optimum cure cycle for an epoxy resin Journal of Materials Science. ,vol. 24, pp. 1984- 1990 ,(1989) , 10.1007/BF02385410
Jong Woon Kim, Ji Hyung Lee, Hyoung Geun Kim, Hak Sung Kim, Dai Gil Lee, Reduction of residual stresses in thick-walled composite cylinders by smart cure cycle with cooling and reheating Composite Structures. ,vol. 75, pp. 261- 266 ,(2006) , 10.1016/J.COMPSTRUCT.2006.04.029
Michael B. Prime, Residual Stress Measurement by Successive Extension of a Slot: The Crack Compliance Method Applied Mechanics Reviews. ,vol. 52, pp. 75- 96 ,(1999) , 10.1115/1.3098926
Yutaka Iwahori, Shin Ishiwata, Tomoji Sumizawa, Takashi Ishikawa, Mechanical properties improvements in two-phase and three-phase composites using carbon nano-fiber dispersed resin Composites Part A-applied Science and Manufacturing. ,vol. 36, pp. 1430- 1439 ,(2005) , 10.1016/J.COMPOSITESA.2004.11.017
S.R. White, H.T. Hahn, Cure Cycle Optimization for the Reduction of Processing-Induced Residual Stresses in Composite Materials Journal of Composite Materials. ,vol. 27, pp. 1352- 1378 ,(1993) , 10.1177/002199839302701402
M. Gentz, D. Armentrout, P. Rupnowski, L. Kumosa, E. Shin, J.K. Sutter, M. Kumosa, In-plane shear testing of medium and high modulus woven graphite fiber reinforced/polyimide composites Composites Science and Technology. ,vol. 64, pp. 203- 220 ,(2004) , 10.1016/S0266-3538(03)00260-4