Performance evaluation of novel developed biodegradable metal working fluid during turning of AISI 420 material
作者： Madan Mohan Reddy Nune , Phaneendra Kiran Chaganti
DOI: 10.1007/S40430-020-02415-1
关键词:
摘要: In the present scenario, metalworking fluids or cutting are contributing a significant amount among consumables used in machining industry. Most of industries use oil-based fluids, which may cause skin and respiratory-related health issues to workers when they exposed for longer hours. These limitations lead developing non-oil-based novel this work, biodegradability performance newly developed fluid was measured compared with commonly by industries. Also, investigated AISI 420 stainless steel turbine blade material an uncoated carbide tool. To circulate recycle at zone, experimental setup developed. The estimated over dry environment conditions. experiments were designed based on Taguchi L27 orthogonal array while keeping removal rate as constant 668 mm3 s−1. control factors environment, depth cut, feed, speed. An optimal parameter combination minimal surface roughness 0.31 μm, tool wear 18.7 μm, temperature 178 °C obtained. This study is expected deliver scientific path toward development enhancing quality safety.
springer.com
sci-hub.st 参考文章(37)
Emel Kuram, Babur Ozcelik, Erhan Demirbas, Environmentally Friendly Machining: Vegetable Based Cutting Fluids Green Manufacturing Processes and Systems. pp. 23- 47 ,(2013) , 10.1007/978-3-642-33792-5_2
Anuj Kumar Sharma, Arun Kumar Tiwari, Amit Rai Dixit, Rheological behaviour of nanofluids: A review Renewable & Sustainable Energy Reviews. ,vol. 53, pp. 779- 791 ,(2016) , 10.1016/J.RSER.2015.09.033
C. Phaneendra Kiran, Shibu Clement, Surface quality investigation of turbine blade steels for turning process Measurement. ,vol. 46, pp. 1875- 1895 ,(2013) , 10.1016/J.MEASUREMENT.2012.12.022
Subodh Kumar, Sanjay Agarwal, Optimization of Machining Parameters for Surface Roughness in EDM of AISI 1045 Based on Taguchi Technique ASME 2010 International Mechanical Engineering Congress and Exposition. pp. 999- 1005 ,(2010) , 10.1115/IMECE2010-39903
Facai Ren, Fei Chen, Jun Chen, Investigation on Dynamic Recrystallization Behavior of Martensitic Stainless Steel Advances in Materials Science and Engineering. ,vol. 2014, pp. 1- 16 ,(2014) , 10.1155/2014/986928
M. C. Adams, J. E. Gannon, E. O. Bennett, BOD and COD studies of synthetic and semisynthetic cutting fluids Water Air and Soil Pollution. ,vol. 11, pp. 105- 113 ,(1979) , 10.1007/BF00163523
C. Bruni, A. Forcellese, F. Gabrielli, M. Simoncini, Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B International Journal of Machine Tools & Manufacture. ,vol. 46, pp. 1547- 1554 ,(2006) , 10.1016/J.IJMACHTOOLS.2005.09.007
Domnita Fratila, Cristian Caizar, Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3 Journal of Cleaner Production. ,vol. 19, pp. 640- 645 ,(2011) , 10.1016/J.JCLEPRO.2010.12.007
S. H. Seyedmahmoudi, Stacey L. Harper, Michael C. Weismiller, Karl R. Haapala, Evaluating the use of zinc oxide and titanium dioxide nanoparticles in a metalworking fluid from a toxicological perspective Journal of Nanoparticle Research. ,vol. 17, pp. 104- ,(2015) , 10.1007/S11051-015-2915-7
Mohd Sayuti, Ahmed A.D. Sarhan, Faheem Salem, Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption Journal of Cleaner Production. ,vol. 67, pp. 265- 276 ,(2014) , 10.1016/J.JCLEPRO.2013.12.052