Ductile—brittle transition of steel electron beam weld metal in small punch test
作者： X. Gai , Y. S. Sato , H. Kokawa , K. Ichikawa
DOI: 10.1179/136217102225004275
关键词:
摘要: AbstractToughness evaluation of narrow high energy beam welds via the conventional Charpy V notch (CVN) impact test is not always successful because cracks often deviate from fusion zone into heat affected or unaffected base metal zones. The small punch (SP) was applied to electron a 490 MPa strength steel evaluate toughness by measuring ductile-brittle transition temperature (DBTT). welded using various inputs and were examined CVN SP tests at 40-298 K. DBTTs obtained showed linear correlation with DBTTs. load-deflection curves during fractography tested specimens indicated existence transitions. results suggest that can be used predict welds, which cannot accomplished test.
elsevier.com
sci-hub.se 参考文章(13)
Y.S. Sato, H. Kokawa, T. Kuwana, Effect of nitrogen on σ transformation in duplex stainless steel weld metal Science and Technology of Welding and Joining. ,vol. 4, pp. 41- 49 ,(1999) , 10.1179/STW.1999.4.1.41
M. Suzuki, M. Eto, K. Fukaya, Y. Nishiyama, T. Kodaira, T. Oku, M. Adachi, A. Umino, I. Takahashi, T. Misawa, Y. Hamaguchi, Evaluation of toughness degradation by small punch (SP) tests for neutron-irradiated 2Cr-1Mo steel Journal of Nuclear Materials. pp. 441- 444 ,(1991) , 10.1016/0022-3115(91)90119-R
A Wolfenden, X Mao, T Shoji, H Takahashi, Characterization of Fracture Behavior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis Journal of Testing and Evaluation. ,vol. 15, pp. 30- 37 ,(1987) , 10.1520/JTE11549J
J. Kameda, X. Mao, Small-punch and TEM-disc testing techniques and their application to characterization of radiation damage Journal of Materials Science. ,vol. 27, pp. 983- 989 ,(1992) , 10.1007/BF01197651
Xinyuan Mao, Hideaki Takahashi, Development of a further-miniaturized specimen of 3 mm diameter for tem disk (ø 3 mm) small punch tests Journal of Nuclear Materials. ,vol. 150, pp. 42- 52 ,(1987) , 10.1016/0022-3115(87)90092-4
T. Misawa, S. Nagata, N. Aoki, J. Ishizaka, Y. Hamaguchi, Fracture toughness evaluation of fusion reactor structural steels at low temperatures by small punch tests Journal of Nuclear Materials. ,vol. 169, pp. 225- 232 ,(1989) , 10.1016/0022-3115(89)90538-2
Jai-Man Baik, J. Kameda, O. Buck, Small punch test evaluation of intergranular embrittlement of an alloy steel Scripta Metallurgica. ,vol. 17, pp. 1443- 1447 ,(1983) , 10.1016/0036-9748(83)90373-3
DR Petersen, Y-H Joo, T Hashida, H Takahashi, K Shimomura, The Use of Small Punch (Bulge) Tests to Estimate Fracture Stress in the Lower Shelf Regime Journal of Testing and Evaluation. ,vol. 20, pp. 336- 342 ,(1992) , 10.1520/JTE11918J
G. Kohse, M. Ames, O.K. Harling, Progress in developing DBTT determinations from miniature disk bend tests Journal of Nuclear Materials. ,vol. 141-143, pp. 513- 517 ,(1986) , 10.1016/S0022-3115(86)80092-7
DR Petersen, RE Link, Y Shindo, K Horiguchi, T Sugo, Y Mano, Finite Element Analysis and Small Punch Testing for Determining the Cryogenic Fracture Toughness of Austenitic Stainless Steel Welds Journal of Testing and Evaluation. ,vol. 28, pp. 431- 437 ,(2000) , 10.1520/JTE12133J