Effect of materials positioning on dissimilar modified friction stir clinching between aluminum 5754-O and 2024-T3 sheets
作者： Zhou Haiyan , Kush P. Mehta
DOI: 10.1016/J.VACUUM.2020.109445
关键词:
摘要: Abstract Dissimilar welding in lap joint configuration between AA5754-O and AA2024-T3 materials is successfully performed using novel technique of Modified Friction Stir Clinching (MFSC) process, wherein positioning analyzed this investigation. The results revealed that dissimilar MFSC greatly influences properties grain formation behavior size, shape orientations. superior protuberance leveling keyhole without any defects with highest fracture load 1483 N having fascinating mixing features were obtained when material was kept on top during second phase MFSC. Dominated ductile characterized as intergranular mode secondary cracks quasi cleavage dimples also observed both
harvard.edu
sci-hub.se 参考文章(21)
Olatunji Oladimeji Ojo, Emel Taban, Erdinc Kaluc, Friction stir spot welding of aluminum alloys: A recent review Materials Testing. ,vol. 57, pp. 609- 627 ,(2015) , 10.3139/120.110752
Y. Bozkurt, Mustafa Kemal Bilici, Taguchi Optimization of Process Parameters in Friction Stir Spot Welding of AA5754 and AA2024 Alloys Advanced Materials Research. ,vol. 1016, pp. 161- 166 ,(2014) , 10.4028/WWW.SCIENTIFIC.NET/AMR.1016.161
Y.C. Lin, Yu-Chi Xia, Yu-Qiang Jiang, Hua-Min Zhou, Lei-Ting Li, Precipitation hardening of 2024-T3 aluminum alloy during creep aging Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 565, pp. 420- 429 ,(2013) , 10.1016/J.MSEA.2012.12.058
Yahya Bozkurt, Mustafa Kemal Bilici, Application of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys Materials & Design. ,vol. 51, pp. 513- 521 ,(2013) , 10.1016/J.MATDES.2013.04.074
Kush P. Mehta, Vishvesh J. Badheka, A Review on Dissimilar Friction Stir Welding of Copper to Aluminum: Process, Properties, and Variants Materials and Manufacturing Processes. ,vol. 31, pp. 233- 254 ,(2016) , 10.1080/10426914.2015.1025971
Moslem Paidar, Alireza Khodabandeh, Hamidreza Najafi, Alireza Sabour Rouh-aghdam, Effects of the tool rotational speed and shoulder penetration depth on mechanical properties and failure modes of friction stir spot welds of aluminum 2024-T3 sheets Journal of Mechanical Science and Technology. ,vol. 28, pp. 4893- 4898 ,(2014) , 10.1007/S12206-014-1108-0
Y X Huang, B Han, Y Tian, H J Liu, S X Lv, J C Feng, J S Leng, Y Li, New technique of filling friction stir welding Science and Technology of Welding and Joining. ,vol. 16, pp. 497- 501 ,(2011) , 10.1179/1362171811Y.0000000032
Rajiv S. Mishra, Z. Y. Ma, Friction Stir Welding and Processing ,(2007)
YAHYA Bozkurt, S Salman, G Çam, None, Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints Science and Technology of Welding and Joining. ,vol. 18, pp. 337- 345 ,(2013) , 10.1179/1362171813Y.0000000111
Muna Khethier Abbass, Sabah Khamass Hussein, Ahmed Adnan Khudhair, Optimization of Mechanical Properties of Friction Stir Spot Welded Joints for Dissimilar Aluminum Alloys (AA2024-T3 and AA 5754-H114) Arabian Journal for Science and Engineering. ,vol. 41, pp. 4563- 4572 ,(2016) , 10.1007/S13369-016-2172-9