Micromechanical and microstructure evolution of leaded (SnPb) and lead-free (SAC305 and SnCu) mixed solder joints during isothermal aging

摘要: This paper studies how isothermal aging affects the micromechanical and structural properties of mixed solder joints made of 60Sn-40Pb (SnPb) with Sn-3.0Ag-0.5Cu (SAC305) and SnPb with Sn-0.7Cu (SnCu). The nanoindentation test was done to measure the micromechanical properties of SnPb/SAC305 and SnPb/SnCu mixed solder joints. These properties are hardness, reduced modulus, and stress exponent. Scanning electron microscopy (SEM) was used to look at the microstructure of a cross-section of mixed solder joints. The micrographs that were taken were then examined with open-source image processing software called ImageJ. It was found that the rate and distribution of intermetallic compound (IMC) formation and the reduction of Sn-rich phase grain size affect how the hardness and stress exponent values of mixed solder joints change after 1000 h of high temperature storage (HTS). ImageJ …