引用次数
引用: 15,221
H-指数: 63
I10-指数 : 266
出版物: 388
Derivation, parameterization and validation of a creep deformation/rupture material constitutive model for SiC/SiC ceramic-matrix composites (CMCs)
Grujicic Mica , Galgalikar Rohan , S Ramaswami
AIMS Materials Science 3 ( 2) 591 -619
3
2016
A computational investigation of impact into multi-plies of plain-woven fabric
G. Arakere , B. A. Cheeseman , M. Grujicic , J. F. Tarter
2008 SAMPE Fall Technical Conference and Exhibition - Multifunctional Materials: Working Smarter Together, SAMPE '08
2008
A model of solution strengthening of austenite by carbon and nitrogen
M. Grujicic , W.S. Owen
Minerals, Metals and Materials Society, Warrendale, PA (US)
1
1999
Tensile testing and TEM analysis of nitrogen-strengthened Fe-Ni-Cr single crystals
X. W. Zhou , M. Grujicic
Journal of Materials Science 31 ( 20) 5373 -5383
1996
Discrete Element Modeling and Analysis of Structural Collapse/Survivability of a Building Subjected to Improvised Explosive Device (IED) Attack
M. Grujicic , J. S. Snipes , S. Ramaswami , R. Yavari
Advances in Materials Science and Applications 2 ( 1) 9 -24
14
2013
Thermodynamics-based alloy design criteria for austenite stabilization and transformation toughening in the FeNiCo system
G.N. Haidemenopoulos , M. Grujicic , G.B. Olson , M. Cohen
Journal of Alloys and Compounds 220 142 -147
35
1995
Implication of elastic coherency in secondary hardening of high Co-Ni martensitic steels
M. Grujicic
Journal of Materials Science 26 ( 5) 1357 -1362
5
1991
Axial-Compressive Behavior, Including Kink-Band Formation and Propagation, of Single p-Phenylene Terephthalamide (PPTA) Fibers
M. Grujicic , S. Ramaswami , J. S. Snipes , R. Yavari
Advances in Materials Science and Engineering 2013 1 -15
20
2013
A finite element analysis of the effect of the accomodation strains in the ferrite phase on the work hardening of a dual-phase steel
M. Grujicic , T. Erturk , W.S. Owen
Materials Science and Engineering 82 151 -159
25
1986
The effect of topological defects and oxygen adsorption on the electronic transport properties of single-walled carbon-nanotubes
M. Grujicic , G. Cao , R. Singh
Applied Surface Science 211 ( 1) 166 -183
99
2003
UV-light enhanced oxidation of carbon nanotubes
M. Grujicic , G. Cao , A.M. Rao , T.M. Tritt
Applied Surface Science 214 ( 1) 289 -303
156
2003
Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process
M. Grujicic , J.R. Saylor , D.E. Beasley , W.S. DeRosset
Applied Surface Science 219 ( 3) 211 -227
366
2003
A crystal plasticity materials constitutive model for polysynthetically-twinned γ-TiAl+ α2-Ti3Al single crystals
M. Grujicic , S. Batchu
Journal of Materials Science 36 ( 12) 2851 -2863
21
2001
A comparative discrete-dislocation/crystal-plasticity analysis of bending of a single-crystalline microbeam
M. Grujicic , D. Columbus
Journal of Materials Science 36 ( 9) 2179 -2188
3
2001
Computer Modeling of the Evolution of Dendrite Microstructure in Binary Alloys During Non-isothermal Solidification
M. Grujicic , G. Cao , R. S. Miller
Journal of Materials Synthesis and Processing 10 ( 4) 191 -203
14
2002
Multi-length scale modeling of chemical vapor deposition of titanium nitride coatings
M. Grujicic , S. G. Lai
Journal of Materials Science 36 ( 12) 2937 -2953
15
2001
Optimization of the VARTM process for enhancement of the degree of devolatilization of polymerization by-products and solvents
M. Grujicic , K. M. Chittajallu , S. Walsh
Journal of Materials Science 38 ( 18) 3729 -3739
13
2003
Assessment of thermodynamic properties of alloys by combining the embedded-atom and the quasiharmonic methods
M. Grujicic , P. Dang
Calphad 19 ( 1) 105 -117
3
1995
Analysis of FeNiCrN austenite using the Embedded-Atom Method
M. Grujicic , X.W. Zhou
Calphad 17 ( 4) 383 -413
46
1993
An analysis of the isothermal isobaric chemical vapor infiltration of TiB2
M. Grujicic
Calphad 18 ( 1) 81 -88
3
1994